Towing Mirror Question ??

Here's a set like the ones he has...For 2003 to 2004 and $157.03 for each side.
http://www.autopartswarehouse.com/de...?apwcid=nextag
I found them on Nextag... In the search box at the top, Type in Ford Expedition.
http://www.autopartswarehouse.com/de...?apwcid=nextag
I found them on Nextag... In the search box at the top, Type in Ford Expedition.
Here's a set like the ones he has...For 2003 to 2004 and $157.03 for each side.
http://www.autopartswarehouse.com/de...?apwcid=nextag
I found them on Nextag... In the search box at the top, Type in Ford Expedition.
http://www.autopartswarehouse.com/de...?apwcid=nextag
I found them on Nextag... In the search box at the top, Type in Ford Expedition.
You're welcome!
Wow!... I didn't know it until I clicked on the link again that those mirrors are ''heated'' and have the ''puddle lights''!... So for mirrors that are power, has turn signals, heated & has the puddle lights, Those are nice mirrors!
I wish the ones in the link on page 1 that I posted of the ones I'm ordering had the puddle lights!.. But I may be able to add that later!.. I have a link saved on where to get them!
Wow!... I didn't know it until I clicked on the link again that those mirrors are ''heated'' and have the ''puddle lights''!... So for mirrors that are power, has turn signals, heated & has the puddle lights, Those are nice mirrors!
I wish the ones in the link on page 1 that I posted of the ones I'm ordering had the puddle lights!.. But I may be able to add that later!.. I have a link saved on where to get them!
Yep, they are from an '03/'04. I bought mine from eBay, and they are also Kool Vue.
Keep in mind, that wiring harness is different, so you will need to wire everything. I tapped the puddle lights into the door lights, that was pretty simple. Motor controls are simple, I just got 2 extra mirror plug ends from the junk yard and sliced those wires. You could cut the ones on the stock mirrors, or just splice right into the wire in the door.
I did not hook up the heat function. I wanted to put that on a switch, but I just never got around to it. You'll be on your own for that. I should have snapped some pictures and did a write up. There are a few wires from the expy mirrors that I didn't use. I honestly hate wiring, but this wasn't too bad.
Stock Mirror Harness Vs Expy.

Keep in mind, that wiring harness is different, so you will need to wire everything. I tapped the puddle lights into the door lights, that was pretty simple. Motor controls are simple, I just got 2 extra mirror plug ends from the junk yard and sliced those wires. You could cut the ones on the stock mirrors, or just splice right into the wire in the door.
I did not hook up the heat function. I wanted to put that on a switch, but I just never got around to it. You'll be on your own for that. I should have snapped some pictures and did a write up. There are a few wires from the expy mirrors that I didn't use. I honestly hate wiring, but this wasn't too bad.
Stock Mirror Harness Vs Expy.

I'm thinking on getting some of those too, but I want some with the power adjust like what's on mine. Heated would be good but I don't have that switch either. wtf is a puddle light? I saw some with the turn signals built in.
The part I'm worried about is taking the door panels off. That has never gone well anytime i've done it on other cars/trucks.
The part I'm worried about is taking the door panels off. That has never gone well anytime i've done it on other cars/trucks.
Well luckily our trucks dont have a stupid push pins that alot of other cars have. I too, feared removing the door panel, but its quite easy. Take out the screws, unplug everything then lift upward then outward.
I'm thinking on getting some of those too, but I want some with the power adjust like what's on mine. Heated would be good but I don't have that switch either. wtf is a puddle light? I saw some with the turn signals built in.
The part I'm worried about is taking the door panels off. That has never gone well anytime i've done it on other cars/trucks.
The part I'm worried about is taking the door panels off. That has never gone well anytime i've done it on other cars/trucks.
Like DHGFX4 mentioned, the door panels are really easy to get off on these trucks.





