Yesterday I made brackets/adaptors to put the Eagle Talon seats back in Frankie.

 

Fans are done and they are so much more quieter than the Ford 10+ F150/Expedition fans. I got a little lazy and just used the probe. We'll see how accurate it is. I left my crossover temp sensor plugged in so I can change it later on. Since I have a lower T-stat, i'll see how well the probe reacts with the Tune.

I went under the truck to put on the exhaust and it's just a freaking mess down there so I put a clamp on it and will deal with it next week.

 

What fans and controller?

 

How about that?



Didn't even try that.

 

Flex-a-lite 270 and it used the better fuse kit from the Flexalite universal kit. It’s literally 1/3 as loud as the ford fans. I didn’t get to adjust it it operating temp I just had then on with the A/c which I think is 60%.

I got tired and wanted to spend time with the family so I quit for the night. I’ll dial it in soon.

 

Hopefully they aren't quieter because they are moving less air (that was the case with the POS Flex-a-lite fan that I had). I'll never own anything they make again. Bad experience.

 

Is there anything that can be done to tighten up the variability of the cruise control?

 

Don't drive in the mountains.

 

Don't know that I mentioned this earlier... sorry if I did, but since we got home, my Dad has been in the hospital with kidney stones/kidney issues. Hoping he gets released today. Poor guy has been through the wringer lately. He turns 70 in a few weeks, so he's still young.

 

Sorry to hear about your dad.