*Cant Quit* build thread
#101
Senior Member
Not really man those are a picture of some pictures from throw away cameras from back in the day... this was in '02-'03 back before our technology was spread, and I didn't take many pictures, sure wish I had. I may be able to find some in my photo album if I can find it lol... My dream 4-wheeler is an '89 honda 250r and plan on getting on someday, also since I'll have my race/dune/trail quad I'll need a bogger and nothings better than a Honda 300 fourtrax 4x4
Those are my runners (warrior tires) Had one of these as well, absolutly the worst 4-wheeler I ever had. (its not even worth mentioning)had a raptor too, but it felt like it needed another gear compared to my shee and it was "hot" so i flipped it pretty quick
94 xr 200 4th grade
84 Honda TRX200 2x4 5th grade
94 Honda 300ex 6th grade
92 Suzuki quadrunner 250 4x4 7th grade
99 suzuki king quad 300 4x4 8th grade
99 suzuki king quad 300 4x4 8th grade another one I was pretty abusive
94 wave runner 8th
99 honda 300 fourtrax 2x4 9th grade
92 single cab chevy 4x4
79 single cab chevy 4x4 (bluefoot)
99 400ex 10th grade
00 banshee 11th grade
97 f150 (Cant Quit)
03 Harley college
Thats basically my life of toys, had a few other odds and ends but never kept them long enough to even matter about telling
Those are my runners (warrior tires) Had one of these as well, absolutly the worst 4-wheeler I ever had. (its not even worth mentioning)had a raptor too, but it felt like it needed another gear compared to my shee and it was "hot" so i flipped it pretty quick
94 xr 200 4th grade
84 Honda TRX200 2x4 5th grade
94 Honda 300ex 6th grade
92 Suzuki quadrunner 250 4x4 7th grade
99 suzuki king quad 300 4x4 8th grade
99 suzuki king quad 300 4x4 8th grade another one I was pretty abusive
94 wave runner 8th
99 honda 300 fourtrax 2x4 9th grade
92 single cab chevy 4x4
79 single cab chevy 4x4 (bluefoot)
99 400ex 10th grade
00 banshee 11th grade
97 f150 (Cant Quit)
03 Harley college
Thats basically my life of toys, had a few other odds and ends but never kept them long enough to even matter about telling
sorry to thread jack lol. but the truck is looking good
#103
Senior Member
Thread Starter
I like how you cut the front bars on the motor mounts, Matt had a hill shot from that was wild man, the frame was drilled throughout and a bolt on rear subfram with a huge stroker motor, i'd say easily 15k in that bike. I want to say the frame itself weighed 4-6lbs no swing arms it was even the J-arm for less weight absolutly crazy! Mine was nothing compared to those hell theres in 4th gear would blow mine away and I had the old parts when they would upgrade lol
My 400ex was matt actually, build number 94 pretty cool I think
lol kinda, not really anything there to look good, but it will look good. I can see the final picture and it's Nasty looking.... Just wait
alittle bit of 20% Under Drive pulley action, "MadEnt" for the water pump also got the High steer arm in but I'm cleaning it up... thing is huge too (thats what she said)
#104
Senior Member
Thread Starter
Here's my braided line I was talking about
-6an straight and a 90* bend going to run a breather canister on the top of the vent line.
Running all my lines up, and submarining everything for the deep puddles
-6an straight and a 90* bend going to run a breather canister on the top of the vent line.
Running all my lines up, and submarining everything for the deep puddles
#105
resident post whore
Originally Posted by harley9703
Here's my braided line I was talking about
-6an straight and a 90* bend going to run a breather canister on the top of the vent line.
Running all my lines up, and submarining everything for the deep puddles
-6an straight and a 90* bend going to run a breather canister on the top of the vent line.
Running all my lines up, and submarining everything for the deep puddles
#106
Senior Member
Thread Starter
yessir
Well I got some good news and I got some bad news guys, I may be movin off for work so I won't be able to work on it as much, but on the other hand I'll be making bank so it'll get finished around the same time lol. When I do come in to work on it, I'll actually be able to drop some coin on it.
Basically what it comes down to, is I'm ready for my house, and I'm going to start looking at homes this summer and hopefully be in it this Christmas.
On another note I ordered some bungs for my rodends (tube adapters) and I got the hardware in for the rockwells. Here's basically what my axles are going to look like plus a pinion brake (that I haven't installed) i need to get some wilwood rotors from jegs or summit, there actually pretty cheap @ $45 ea. I have some D-rings sitting on top of the axle, that will be welded on the back side, for low ****** points if there needed there will also be 2 on the front of the front axle.
More of a side view, those 20's look right at home on this monster. It's hard getting this whole axle in a picture
I saw this pic and figured you guys would like it, makes me want to build another kegorator... Mine got jacked in college. Something like this would be nice though in the garage haha
Well I got some good news and I got some bad news guys, I may be movin off for work so I won't be able to work on it as much, but on the other hand I'll be making bank so it'll get finished around the same time lol. When I do come in to work on it, I'll actually be able to drop some coin on it.
Basically what it comes down to, is I'm ready for my house, and I'm going to start looking at homes this summer and hopefully be in it this Christmas.
On another note I ordered some bungs for my rodends (tube adapters) and I got the hardware in for the rockwells. Here's basically what my axles are going to look like plus a pinion brake (that I haven't installed) i need to get some wilwood rotors from jegs or summit, there actually pretty cheap @ $45 ea. I have some D-rings sitting on top of the axle, that will be welded on the back side, for low ****** points if there needed there will also be 2 on the front of the front axle.
More of a side view, those 20's look right at home on this monster. It's hard getting this whole axle in a picture
I saw this pic and figured you guys would like it, makes me want to build another kegorator... Mine got jacked in college. Something like this would be nice though in the garage haha
#107
Senior Member
Thread Starter
Haven't really done any tech type stuff, but I'm having a few parts roll in.
Here's my Adams off road hi steer arm and one of my emblems that'll finish the Harley theme off on Cant Quit.
Here's my Adams off road hi steer arm and one of my emblems that'll finish the Harley theme off on Cant Quit.
#108
Senior Member
Thread Starter
New tail lights
What do yall think?
Thoughts and opinions welcome... I think there pretty saweet I have the stockers I'll run in the pits, these will be for the shows...
Thoughts and opinions welcome... I think there pretty saweet I have the stockers I'll run in the pits, these will be for the shows...