Windows not working
#1
Windows not working
my windows won't roll down at all, I'm not getting power to the actual switches. I fixed a few wires that broke at the hinge of the door and checked the continuity on the harness inside the door and everything is good. The power mirrors work and the power locks work but not the windows. I checked fuse 401 and the fuse is fine. My question is, is there any other fuses that I can check for the power windows, im not having any luck finding a wire diagram online at all. Thank you guys for your time.
nick
nick
The following users liked this post:
Nicholas Holland (03-05-2017)
#6
LightningRod
Here's a wiring diagram for windows on an '05. I don't think there would be major differences except maybe some wire colors or something.
https://www.f150forum.com/attachment...dow-wiring.pdf
perhaps this will help.
https://www.f150forum.com/attachment...dow-wiring.pdf
perhaps this will help.
Trending Topics
#8
LightningRod
You mentioned fuse 401 in your original post so I'm presuming the linked 2005 diagram is relatively representative.
I would use a test light probe and check for power on both sides of fuse 401. The fuse may be fine, but if you don't have 12 volts there a good fuse ain't gonna' help. Right after that I'd be checking all the pins of the relay at the top of the diagram. It is one thing that can KILL ALL the windows if its contacts are bad/corroded or if its coil is open or a bad wire from pin 21 to the Instrument cluster is 'open'.
I would use a test light probe and check for power on both sides of fuse 401. The fuse may be fine, but if you don't have 12 volts there a good fuse ain't gonna' help. Right after that I'd be checking all the pins of the relay at the top of the diagram. It is one thing that can KILL ALL the windows if its contacts are bad/corroded or if its coil is open or a bad wire from pin 21 to the Instrument cluster is 'open'.
#10
I ran a wire from 401 to the switch and the windows work, I'm guessing that there's a short somewhere in between there,I'm just going to run a new wire to the door, I thinks that's my only option