Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

power windows

Thread Tools
 
Search this Thread
 
Old Mar 30, 2014 | 10:43 AM
  #1  
Justinmur's Avatar
Thread Starter
grass man
 
Joined: Jun 2011
Posts: 62
Likes: 1
From: Covington, LA
Default power windows

Started having problems with my power windows. None of them will work. Looked at the fuses and their is not one just for windows. My sunroof and everything else on that fuse location works. I did notice that the switches are not lighting up at night. Could this be a bad switch or wiring? I read through some other post but did not see this problem posted. Thanks
Reply
Old Mar 30, 2014 | 12:43 PM
  #2  
techrep's Avatar
Senior Member
15 Year Member
Veteran: Navy
iTrader: (1)
 
Joined: Jan 2009
Posts: 37,815
Likes: 2,714
From: Va. Beach, VA.
Default

Master switch panel is a common problem ...
Reply
Old Mar 30, 2014 | 12:54 PM
  #3  
spaseghost's Avatar
Member
 
Joined: Mar 2014
Posts: 34
Likes: 3
From: Western Colorado
Default

https://www.f150forum.com/f75/how-cl...ontacts-53265/
Reply
Old Mar 31, 2014 | 10:21 AM
  #4  
uzikaduzi's Avatar
Senior Member
 
Joined: Mar 2014
Posts: 1,092
Likes: 147
Default

If you end up needed new switches, I found them on ebay for less than 1/3 of what napa wanted for them
Reply
Old Mar 31, 2014 | 12:43 PM
  #5  
Justinmur's Avatar
Thread Starter
grass man
 
Joined: Jun 2011
Posts: 62
Likes: 1
From: Covington, LA
Default

Originally Posted by uzikaduzi
If you end up needed new switches, I found them on ebay for less than 1/3 of what napa wanted for them
Thanks, that's what I am working on today. I saw that one of the vendors on here, 1A Auto, had them for $70. Probably go with them.
Reply
Old Mar 31, 2014 | 06:40 PM
  #6  
Justinmur's Avatar
Thread Starter
grass man
 
Joined: Jun 2011
Posts: 62
Likes: 1
From: Covington, LA
Default Now what

Plugged in a new switch and still no good. Checked continuity on all the switches and they were good. What should I do next? Is their a fuse for just power windows? From what I saw in om others run off of it but I could be wrong.
Reply
Old Mar 31, 2014 | 07:29 PM
  #7  
2006scab's Avatar
Member
 
Joined: Jul 2012
Posts: 50
Likes: 3
From: The great state of Texas
Default

I just changed my master switch a couple weeks ago. My front driver side window would roll down fine but wouldn't roll up. I would make sure you have power to your switch, make sure you have a good ground, and make sure you have a good connection between your switch and your wires.
Reply
Old Mar 31, 2014 | 07:42 PM
  #8  
08silverbullet's Avatar
Senior Member
 
Joined: Feb 2014
Posts: 1,682
Likes: 78
From: Pearland, TX
Default

Sometimes I have to peed my drivers side window switch 3-4 times to get it to roll up
Reply
Old Mar 31, 2014 | 07:43 PM
  #9  
08silverbullet's Avatar
Senior Member
 
Joined: Feb 2014
Posts: 1,682
Likes: 78
From: Pearland, TX
Default

Press not peed stupid phone
Reply
Old Mar 31, 2014 | 07:49 PM
  #10  
Justinmur's Avatar
Thread Starter
grass man
 
Joined: Jun 2011
Posts: 62
Likes: 1
From: Covington, LA
Default

Originally Posted by 2006scab
I just changed my master switch a couple weeks ago. My front driver side window would roll down fine but wouldn't roll up. I would make sure you have power to your switch, make sure you have a good ground, and make sure you have a good connection between your switch and your wires.
While I was checking continuity I had a test light and could not find a hot line. Where would the beginning of this be or the ground be?
Reply



All times are GMT -4. The time now is 06:11 AM.