I was wondering if anyone has done the gotts mod to there truck.i have a 4.6in my f150. I was thinking about doing this...any suggestions on it, pics, or instructions would be very helpful. thanks

 

Check out my build thread link found in my sig

 

https://www.f150forum.com/f4/stop-be...l-links-42829/


Pretty good write up in there...


aw heck.... I'll even post the direct link


https://www.f150forum.com/f4/gotts-i...ication-33219/

 

Thanks guys

 

For a 4.6L you only need about 6" of 3" PVC and a 3" rubber pipe coupling. I got the coupling from Home Depot for less than $7 and my neighbor had some scrap PVC. Check with a plumbing company, they usually have a scrap pile you can rummage around in and find a piece of PVC.