Originally Posted by losttime

will these steps work if i don't have the MFT screen? all i have is the radio and the little display screen.

Originally Posted by jgohlke

I did a bunch of research on this and it seems that the iPhone Bluetooth screen is dynamic and reconfigures itself based on the BT connection. If you aren't seeing the "Show Notifications" option (in the truck with phone paired; iPhone, settings, Bluetooth, touch blue arrow to right of "Sync", this is the Sync BT profile), you may need to re-pair your phone. You want to force a completely new connection. I found these steps on another forum and fixed them up a little to help make them clearer and less ambiguous. The hardest part for me, when I was doing this was trying to figure out what to do on the phone and what to do on the truck.

Hope this helps!

1) Truck - Delete phone from BT device list.
2) Phone - Delete Sync from BT connection list.
3) Phone - Reboot. (Do steps 4 & 5 while you wait for this to finish)
4) Truck - Turn off, pull the key, open the door.
5) Truck - Close the door, restart.
6) Truck/Phone - Pair your phone fresh w/MFT. Let it finish.
7) Phone - Turn BT off.
8) Phone - Turn BT on.
9) Truck - Hit "connect" on the MFT screen to reconnect BT.
10) Phone - Go into the BT Profile Settings screen for Sync (little arrow to the right of Sync, in Settings, Bluetooth)
11) Phone - Set Notifications to "On".
12) Phone - Back up a screen and turn BT off again.
13) Phone - Turn BT back on.
14) Truck - Hit "connect" on the MFT screen again to reconnect to phone.

Originally Posted by gq.

Jgohlke is my hero! I've fiddled with this thing for weeks. MFT guys try this procedure, worked like a charm for me.

Originally Posted by jgohlke

I did a bunch of research on this and it seems that the iPhone Bluetooth screen is dynamic and reconfigures itself based on the BT connection. If you aren't seeing the "Show Notifications" option (in the truck with phone paired; iPhone, settings, Bluetooth, touch blue arrow to right of "Sync", this is the Sync BT profile), you may need to re-pair your phone. You want to force a completely new connection. I found these steps on another forum and fixed them up a little to help make them clearer and less ambiguous. The hardest part for me, when I was doing this was trying to figure out what to do on the phone and what to do on the truck.

Hope this helps!

1) Truck - Delete phone from BT device list.
2) Phone - Delete Sync from BT connection list.
3) Phone - Reboot. (Do steps 4 & 5 while you wait for this to finish)
4) Truck - Turn off, pull the key, open the door.
5) Truck - Close the door, restart.
6) Truck/Phone - Pair your phone fresh w/MFT. Let it finish.
7) Phone - Turn BT off.
8) Phone - Turn BT on.
9) Truck - Hit "connect" on the MFT screen to reconnect BT.
10) Phone - Go into the BT Profile Settings screen for Sync (little arrow to the right of Sync, in Settings, Bluetooth)
11) Phone - Set Notifications to "On".
12) Phone - Back up a screen and turn BT off again.
13) Phone - Turn BT back on.
14) Truck - Hit "connect" on the MFT screen again to reconnect to phone.

Originally Posted by waverider969

Tried it, no luck. Still no Notification ON/OFF in Bluetooth profile on phone, just contacts.
I do not have MFT just the older Sync found on 2012 trucks.