adding an additional fuse box
Junior Member
Joined: Dec 2016
Posts: 1
Likes: 0
I added the Blue Sea fuse panel under the hood. I wanted easy access and close to the battery for the power run. I had a heck of a time trying to figure out a place for it. I fabricated a bracket that would hold the relays and use the top of the batter tray lip to secure it. Clear of the A/C lines, battery is removable, etc.
[IMG]
[/IMG]
[IMG]
[/IMG]
5 Year Member
Joined: Aug 2013
Posts: 494
Likes: 38
From: Livonia, MI
Senior Member
Joined: Oct 2012
Posts: 1,362
Likes: 235
Sorry, I don't have a template. I do have a fabrication jig.
The angle at the battery corner is 90 degrees. You can mark the fuse support angle by simply placing a piece of angle at the angle you want then measure it or tack weld it and space the second piece the width of your fuse panel.
Material 3/4" angle for the frame, 1" flat at the end.
The angle at the battery corner is 90 degrees. You can mark the fuse support angle by simply placing a piece of angle at the angle you want then measure it or tack weld it and space the second piece the width of your fuse panel.
Material 3/4" angle for the frame, 1" flat at the end.