WOW!!!
Thread Starter
Senior Member
Joined: Dec 2008
Posts: 1,710
Likes: 31
From: ft. worth
Completely forgot about ordering this til I went to check my mail.
Aluminum pipe plugs for the lower intake.
This is part of the PCV system thats getting deleted, I'm going to 2 catch cans.
Aluminum pipe plugs for the lower intake.
This is part of the PCV system thats getting deleted, I'm going to 2 catch cans.
Thread Starter
Senior Member
Joined: Dec 2008
Posts: 1,710
Likes: 31
From: ft. worth
I picked up some Al hardware for the cell
also had some solid motor mounts show up
I'm not 100% sold on these motor mounts vs. poly but I guess I'll give them a shot.
Heard blocks, bell housings, and tail shafts tend to crack with solid due to flexing and it binds up.
My truck will have a whole lot more bracing, and theres alot who have run them with no problems what so ever. We'll see. haha
also had some solid motor mounts show up
I'm not 100% sold on these motor mounts vs. poly but I guess I'll give them a shot.
Heard blocks, bell housings, and tail shafts tend to crack with solid due to flexing and it binds up.
My truck will have a whole lot more bracing, and theres alot who have run them with no problems what so ever. We'll see. haha
Thread Starter
Senior Member
Joined: Dec 2008
Posts: 1,710
Likes: 31
From: ft. worth
found my distribution block for the e-fans/KC lights and threw some wires in it.
2g to the battery and 4g to the relays
also play with the wipers alittle
What do y'all think??? If I don't like it I will paint the whole arm.
I sanded the wiper end off and touched up the mounting end side
2g to the battery and 4g to the relays
also play with the wipers alittle
What do y'all think??? If I don't like it I will paint the whole arm.
I sanded the wiper end off and touched up the mounting end side
Thread Starter
Senior Member
Joined: Dec 2008
Posts: 1,710
Likes: 31
From: ft. worth
Gonna head home to East Texas this weekend. Plannin on dropping the tranny...
Also been tossing around the idea of a tilt front end like a Mack or school bus so gonna take some measurements. we'll see if it's doable.
Also been tossing around the idea of a tilt front end like a Mack or school bus so gonna take some measurements. we'll see if it's doable.
Senior Member
Joined: Jan 2010
Posts: 498
Likes: 0
Goooooo for it
Thread Starter
Senior Member
Joined: Dec 2008
Posts: 1,710
Likes: 31
From: ft. worth
Please enlighten me!!!
Of what... time? Naw keeps me out of trouble, because I know how hard I party when I go out... (Dumb ***** jail visits.)
Of a bad gas mileage DD? Not hardly thats what I have the Lexus for...
Money? Who cares do it while I can... Just set up a mutual fund for a house so the trucks gonna slow down a little...(need a place to bring the girls back home to after the bar. And Future projects "that are a waste")
So Maybe you need to go **** off in somebody elses thread, because the only thing here thats getting wasted is my time. 16 posts in 3 years go drive your fake harley around the block and think about how much fun I have with my wasted *****.
Whatever
Of what... time? Naw keeps me out of trouble, because I know how hard I party when I go out... (Dumb ***** jail visits.)
Of a bad gas mileage DD? Not hardly thats what I have the Lexus for...
Money? Who cares do it while I can... Just set up a mutual fund for a house so the trucks gonna slow down a little...(need a place to bring the girls back home to after the bar. And Future projects "that are a waste")
So Maybe you need to go **** off in somebody elses thread, because the only thing here thats getting wasted is my time. 16 posts in 3 years
go drive your fake harley around the block and think about how much fun I have with my wasted *****.Whatever
Thread Starter
Senior Member
Joined: Dec 2008
Posts: 1,710
Likes: 31
From: ft. worth
Super Moderator
Joined: May 2009
Posts: 14,125
Likes: 222
From: corn field