It fits as far as I can tell.
You'll either have to cut the trim yourself, or buy the trim piece. And the Lakeland Ford website I provided a link to in post 48 is the best place to get that.

When you look up your truck, look it up as an XL.

 

well mounted on my 2022 stx today. went pretty well Except making sure I have the wire routed correctly .I hope right. Now the hard part. I don't know anything about forscan. I ordered theVgat vlinker off amazon . any one have any programming instructions?

 

You did the hard part with the install and getting the wiring ran.The Forescan part is super easy especially with all the help on this forum.

 

Less than 4 hours to do the complete install for the the wired keypad on a 2022 XL 101A today, now time to activate the software with FORScan.

 

My old computer with windows 7 would not run the forscan. once a borrowed a lap top it was a easy install.

 

I can confirm that 2022 F150 Lightning Pro has the same unused wire harness inside the door and it came with an access code.

This $20 keypad physically fits/connects.
https://www.tascaparts.com/oem-parts...d-fl3z14a626af

Had to email Forscan support to get a ($12) version of the software that works with the 2022 Lightning.

 

I have a 2023 lightning pro and I think the trim pieces are the same? Do you have the part number for the trim piece with the cutout?
thanks!!

 

did you cut your piece or buy new one? Part number or where you ordered? Thank you!!

 

Check the sticky on Forscan for help.

took me about six months to start using the factory keypad, now it’s in daily use.

 

I have used several with never any problems
I had it set up at the dealer though, could not do it w/ Forscan