Upgrade Sync 3 V3.0 to V3.4 instructions
#541
It's my first day
Thread Starter
What you're asking for doesn't exist and never has, but I'll send you a PM. You will have to download the files individually from Ford. Also, somewhere in this thread a few pages back someone listed all the original MD5's.
#542
Do you have a CD player? The new ACMs don't have a CD player. The thing is, as a 2019, your truck should already have those address blocks, and the correct values. What do you have in 08 and 09? Also, have you tried sending a refresh signal to the radio from the SiriusXM website?
#545
What is interesting about all of this is we know that the logos are both in the OS package, and also able to be updated over the air (reference seasonal stations like Holly)...
#546
It's my first day
Thread Starter
Originally Posted by AGFazio
Here is what I have. I don't have an 09 section.
Having the wrong region setup (5753) might be impacting owners OTA updates from Sirius after the Sync 3.4 update completes. 5753 is a country code that doesn't support Sirius, so Sirius might be reading that address and not pushing content down, but you can still access the broadcast because of your physical location.
You may want to consider reloading all stock APIM as built data and then perform the format and install process again.
Last edited by Airborne_Ape; 10-26-2019 at 12:25 PM.
The following users liked this post:
swamplynx (10-26-2019)
#547
I did the update and did include the DAB file, while some sites say it’s not used/necessary for an NA radio I have 0 issues with Sirius logos. I did get the subscription update right afterward and the logos were still good.
#548
Wow nice job. Works great on 2017 Explorer NAV APIM
I grabbed the files mentioned by the OP and took the plunge on my 2012 Explorer with a 2017 NAV APIM and upgraded USB ports as well. It took under 30 minutes from start to finish with two separate USB drives in use. The 1st USB only transfers a small file and so it can be a small slow old USB drive formatted as FAT32. The 2nd USB needs to do the heavy lifting and the faster read speeds the better so go for a fast USB 3.0 drive if possible and also make sure to format it to FAT32. I was on 3.0 19205 before I started the upgrade. I did not do the firmware upgrade but I have the files in case I need to for some reason in the future.
The new 3.4 interface is sleek and fast and much snazzier than the 3.0 software. I can't wait to mess with the Android Auto apps that are now compatible with my SUV!
Thanks, @Airborne_Ape and this community!
The new 3.4 interface is sleek and fast and much snazzier than the 3.0 software. I can't wait to mess with the Android Auto apps that are now compatible with my SUV!
Thanks, @Airborne_Ape and this community!
Last edited by explorerenthusiast; 10-26-2019 at 09:05 PM. Reason: forgot ambient lighting works now
The following users liked this post:
PlatinumOwner (10-27-2019)
#550
Senior Member
iTrader: (14)
Here's a new one. I just did my SOs 17 Escape and now I get this prompt every time on startup "location and vehicle data sharing is enabled. pair a device to disable this prompt" whereas I didnt before. Yes her android is paired via bluetooth as well as thru the fordpass app. I started playing around with some of the config settings and finding out that some no longer work/bits changed (e.g. 7D0-01-02 ****- YYYY-****, the Ys are now different on 3.4), looks like some remapping is in order.
How do you get rid of that annoying location vehicle data sharing message? Already tried this:
https://www.f150forum.com/f118/disab...ection-423047/
to no avail. Suggestions welcomed.
How do you get rid of that annoying location vehicle data sharing message? Already tried this:
https://www.f150forum.com/f118/disab...ection-423047/
to no avail. Suggestions welcomed.
Last edited by TexasFording; 10-26-2019 at 09:17 PM.