Upgrade Sync 3 V3.0 to V3.4 instructions
12-01-2019, 02:05 PM
#1031
It's my first day
Thread Starter
Originally Posted by JATman
I clicked "Master Reset" in my settings menu prior to upgrading ( because I have lots of ForScan stuff) I turned on my truck,
The following users liked this post:
JATman (12-01-2019)
12-01-2019, 02:20 PM
#1032
It's my first day
Thread Starter
Originally Posted by kry226
Edited to add that I too appreciate the work that's gone into making this upgrade a reality. First post here.
So I have found some broken features after upgrading yesterday, neither one I'm crazy about.
1. As previously mentioned, no longer can you browse your USB folders in their entirety unless stopped.
2. Voice command operations seem terrible now. So far in 10 minutes trying, it hasn't recognized a single music command yet. With 3.0, I used to say, "Play Zac Brown Band." And it would play. All I get now is, "I didn't get that..." The music commands have changed for whatever reason, and even when I follow the command cues, "Show music by _____," still nada. But it's counterintuitive that the system now prevents you from browsing your media folders at speed, but the command for the same music media is "show", which defeats the point of voice commands in the first place. I did get it to recognize a couple of addresses in the nav.
3. I also noticed no fuel prices can be found either. The rest of Travel Link seems to work fine.
I have also noticed some lag, not much different from the 3.0 I upgraded from. I like the updated maps, but so far, I've gone backwards in capability. Wish I had my functionality back.
I did not do a master reset, but I also didn't see where that was required or recommended. Is that necessary?
So I have found some broken features after upgrading yesterday, neither one I'm crazy about.
1. As previously mentioned, no longer can you browse your USB folders in their entirety unless stopped.
2. Voice command operations seem terrible now. So far in 10 minutes trying, it hasn't recognized a single music command yet. With 3.0, I used to say, "Play Zac Brown Band." And it would play. All I get now is, "I didn't get that..." The music commands have changed for whatever reason, and even when I follow the command cues, "Show music by _____," still nada. But it's counterintuitive that the system now prevents you from browsing your media folders at speed, but the command for the same music media is "show", which defeats the point of voice commands in the first place. I did get it to recognize a couple of addresses in the nav.
3. I also noticed no fuel prices can be found either. The rest of Travel Link seems to work fine.
I have also noticed some lag, not much different from the 3.0 I upgraded from. I like the updated maps, but so far, I've gone backwards in capability. Wish I had my functionality back.
I did not do a master reset, but I also didn't see where that was required or recommended. Is that necessary?
Try again but replace 5U5T-14G391-CB with the USA specific 385 MB file:
USA English voice package:
VOICE = 5U5T-14G391-CE_1550850032000.tar.gz
I linked the file for direct download for your convenience.
Last edited by Airborne_Ape; 12-01-2019 at 02:40 PM.
The following users liked this post:
Firerunner (12-01-2019)
12-01-2019, 02:52 PM
#1033
It could be a bug, but it might have something to do with the fact I used the EU English voice package (because it sounds much better).
Try again but replace 5U5T-14G391-CB with the USA specific 385 MB file:
USA English voice package:
VOICE = 5U5T-14G391-CE_1550850032000.tar.gz
I linked the file for direct download for your convenience.
Try again but replace 5U5T-14G391-CB with the USA specific 385 MB file:
USA English voice package:
VOICE = 5U5T-14G391-CE_1550850032000.tar.gz
I linked the file for direct download for your convenience.
12-01-2019, 03:31 PM
#1034
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
Sweet.... Thanks Chad...I haven't messed with voice commands much since the changing the version, but I saved this file in case I do have issues.
12-01-2019, 03:58 PM
#1035
Senior Member
I updated several weeks ago to 3.4. without NAV. For whatever reason I cannot get the "3rd USB" to install. Tried two differnt thumb drives, confirmed my files are correct, etc. It starts the update but hangs up at some point. Not sure why, as I've never had issues upgrading via usb.
12-01-2019, 04:12 PM
#1036
I updated several weeks ago to 3.4. without NAV. For whatever reason I cannot get the "3rd USB" to install. Tried two differnt thumb drives, confirmed my files are correct, etc. It starts the update but hangs up at some point. Not sure why, as I've never had issues upgrading via usb.
The following users liked this post:
SwatDawg15 (12-01-2019)
12-01-2019, 04:58 PM
#1037
It could be a bug, but it might have something to do with the fact I used the EU English voice package (because it sounds much better).
Try again but replace 5U5T-14G391-CB with the USA specific 385 MB file:
USA English voice package:
VOICE = 5U5T-14G391-CE_1550850032000.tar.gz
I linked the file for direct download for your convenience.
Try again but replace 5U5T-14G391-CB with the USA specific 385 MB file:
USA English voice package:
VOICE = 5U5T-14G391-CE_1550850032000.tar.gz
I linked the file for direct download for your convenience.
Agreed!
The following users liked this post:
xrlizard (12-01-2019)
12-01-2019, 07:47 PM
#1038
Senior Member
So from another forum sync 3.3 has an update coming for issues what will happen if you update to 3.4 and there are fixes and you do this update?
Other post
If you are at Build 19205 you have the latest software. However, there is a new update forthcoming that will address the voice recognition pauses and stuttering issue.
Other post
If you are at Build 19205 you have the latest software. However, there is a new update forthcoming that will address the voice recognition pauses and stuttering issue.
12-01-2019, 08:11 PM
#1039
Senior Member
So from another forum sync 3.3 has an update coming for issues what will happen if you update to 3.4 and there are fixes and you do this update?
Other post
If you are at Build 19205 you have the latest software. However, there is a new update forthcoming that will address the voice recognition pauses and stuttering issue.
Other post
If you are at Build 19205 you have the latest software. However, there is a new update forthcoming that will address the voice recognition pauses and stuttering issue.