Reset keyless entry code
Thread Starter
Member
Joined: Jun 2012
Posts: 48
Likes: 2
Reset keyless entry code
I bought my 2015 F-150 used from a Chevy dealership six months ago. It didn't come with the code for the keyless entry. I never tried to set it up until now, so I didn't realize it was missing. I called the dealership I bought it from and they pretty much said they can't help since it's a Ford. The Ford dealership will charge me $70 to reset it. Anyone know how to reset it myself without the original code?
Senior Member
Joined: Jun 2016
Posts: 101
Likes: 10
Try this. It worked for my 2016. This will display factory code.
Displaying the Factory Set Code
Note: You will need to have two programmed passive anti-theft keys for
this procedure.
To display the factory set code in the information display:
1. Insert a key into the ignition and turn the ignition on for a few
seconds.
2. Turn the ignition off and remove the key.
3. Insert the second key into the ignition and turn the ignition on.
The factory set code will display for a few seconds.
Note: The code may not display until after any other warning messages
first display.
Displaying the Factory Set Code
Note: You will need to have two programmed passive anti-theft keys for
this procedure.
To display the factory set code in the information display:
1. Insert a key into the ignition and turn the ignition on for a few
seconds.
2. Turn the ignition off and remove the key.
3. Insert the second key into the ignition and turn the ignition on.
The factory set code will display for a few seconds.
Note: The code may not display until after any other warning messages
first display.
Senior Member
Joined: Dec 2013
Posts: 14,975
Likes: 6,035
From: SE Michigan
You cannot change the original code, but you can add your own code. Your manual should tell you how to display your code, and can be found on the Ford site.
Last edited by Ricktwuhk; Jun 16, 2016 at 09:14 PM.
Thread Starter
Member
Joined: Jun 2012
Posts: 48
Likes: 2
Try this. It worked for my 2016. This will display factory code. Displaying the Factory Set Code Note: You will need to have two programmed passive anti-theft keys for this procedure. To display the factory set code in the information display: 1. Insert a key into the ignition and turn the ignition on for a few seconds. 2. Turn the ignition off and remove the key. 3. Insert the second key into the ignition and turn the ignition on. The factory set code will display for a few seconds. Note: The code may not display until after any other warning messages first display.
Senior Member
Joined: Dec 2013
Posts: 14,975
Likes: 6,035
From: SE Michigan
You cannot change it. Only add your own, not erase the original.
Trending Topics
Senior Member
Joined: Jun 2016
Posts: 101
Likes: 10
Found On Road Dominating
Joined: Oct 2012
Posts: 1,360
Likes: 189
From: Eastern Canada
As you don't know what the previous owners code was you should dig out that manual and clear all codes. As Rick stated you can't erase the original code but Ford dealer can ( I think ). It might be in your best interest to do this as the previous owner likely has the original code tab. It might also be somewhere in the manual pouch. Good luck.
Senior Member
Joined: Jun 2016
Posts: 101
Likes: 10
If previous owner wants your sunglasses or radar detector ...... oh well. He probably knows factory code.
Last edited by EdB; Jun 16, 2016 at 09:35 PM.
