When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
There probably isn't any. With a retrofit, you are able to rotate the projector before tightening it down. These are custom made and the projectors appear to be molded in. It would probably require taking them completely apart but I'm not sure. You may be stuck with them like that or contact TRS and see about getting them replaced. For the money spent on those, I would. Just my 2 cents.
How do I go about rotating the headlight? The headlights allow for the vertical and horizontal adjustment, but I didn't find any rotation adjustment.
dont know it will help you or not. I adjusted mine up as far as they would go. Then dropped them back down and they lined up perfectly.
of course I did all this with one bolt up top on .
dont know it will help you or not. I adjusted mine up as far as they would go. Then dropped them back down and they lined up perfectly.
of course I did all this with one bolt up top on .
Interesting.., Your beams are perfectly flat and sharp but now youre missing the upper step up and slope of each projector pair.
Tpballs, your lights look level. Totemus' lights appear to be rotated. No amount of moving them up or down will change the rotation to level.
I had the steps and decided Im going up as far as I can . Then I went down and they balanced out. It was worth a shot to me and it worked for me .
i think your right as well being to close to the wall. Ill take a pic further away and see how it compares
After a few adjustments, we finally got the lights leveled (although the high beams may get adjusted again, not sure I found the sweet spot for my tastes). I am really happy with how they look and the performance compared to the OEM halogen headlights. Thanks to everyone on this thread that contributed and helped make this as painless of an installation as it could have possibly been!
Man those look good Im still waiting on mine. Ordered on Christmas Day and still just says processing:/ hoping we still have decently warm weather when they arrive.
Almost pulled the trigger on a set but 1500 bucks is a little steep. When i did aftermarlet lights before i was never happy. Moisture issues mainly. How are these holding up?
12-28-2018, 07:07 PM
