'16AzScrew

Low beam fog



Led driver


Halogen passenger


Driver side fog


Driver's side done high beam


Fogs lef


Halogens



Installing the 10 inch sub. New rear new front new center speakers and amplifier this weekend.

Sanf150

Sure about the white LED's replacing the amber turn signal bulbs?

Summers22

iTrader: (2)

Brand? Links? Prices?

'16AzScrew

99.99
49.99
Switchback Turn Signals - Amber/White DRL - iBrightStar 22.00

LED switchback, means it's LED DRL then when signal engaged, swaps to amber, then back to DRL when turn complete or blinker disengaged.

@Sanf150 see above

csp1981

Did the switchback turns require resistors?

Stadt

Interested to see the light output and pattern

BlackBoost

x2 on the light output, and if the cutoff is maintained. Many LED bulbs don't maintain the halogen's focus and the light ends up blinding anyone in front of you. The ones you linked have very large LED chips, which is bad. Check the link in my signature for more info on the proper bulbs and some examples of ones I've tested that didn't make the cut. Don't get me wrong, do what you want, it's your truck, I'm just pointing it out.

'16AzScrew

I'm getting hyper blink in the dash, the bulbs flash normal speed outside. Going to add a resister to the rear as that is when it started. I bought 50w 5ohm to try.

'16AzScrew

I believe it was your post that had me purchase these. Just off-brand with same Philips insides.

Heading up north to Showlow Arizona in a weekend or so, I will get some night picks of the woods and roads, then compare to city here.

Whysoangry

Thanks for posting this. Would you please expand a little on the switchback and what's required for programming? I'm interested in setting the white turn signal mode to be DRL, and that they turn bright amber (amber and off) for turn signals, and back to bright white. Not sure if that's an option yet...