Livnitup

That's one of many I own and it works fine.

Scotsskier

OK. Just taken my first baby steps with Forscan on my 16 Lariat sport. Set the RS display, Bambi mod, Lincoln mirrors, heated/cooled seats on the home screen and actual temps on the cooling and transmission. I haven't been able to find it here but was wondering if there was a way to show actual values on the oil pressure and turbo boost gauges?

Thanks!

Livnitup

No, nothing for oil pressure or turbo boost unfortunately.

Scotsskier

OK, next question

What is
726-13-01 xxxx *xxx xxxx Collision Mitigation By Braking

Does this apply the brakes when the forward collision warning appears??? Didn't realize this was available as an option?

Livnitup

I'm unsure what value changes here will do (and I'm not going to try lol) but this is what the other software I have listed as a description.

aleks192

I would say from my experience from Jeep, you need the ACC radar for that to work. It would apply brake when it sensed impending collisions, worked amazing actually, but used the adaptive cruise sensors for it

Scotsskier

Sounds like that is it, I have ACC so will need to check what that setting is showing as.

Another Q wrt DTCs. I am showing 2 DTCs in the SCCM which will not clear. One is U2101:00-0A Control module configuration incompatible. Status DTC present at time of request Malfunction Indicator lamp is off for this DTC.
and
B1380:09-0A Steering wheel right switch pack. Status DTC present at time of request Malfunction Indicator lamp is off for this DTC.

Any thoughts/concerns i should have?

thanks!

2016 FX4x4

That's what I use works great,
you start out in HS mode

OrionPax

I picked up the sync 3 module from a 2017 f150. Outside of a few DTC's, I'm trying to get the climate tab to show. I have a f150 xlt (2015), with sync 2 I could get a limited number of temperature controls.

For some reason I haven't been able to make the tab show up on the sync 3 setup.

I know the xlt is limited and that's fine but I've heard other say it can be enabled. I was able to turn on the cool/heated seat buttons even if I only have the heated. If some one can help me out. I am using the as built data from the donor truck the APIM.

Livnitup

APIM 7D0-01-01 xxxx xxxx x3xx - Heated Seats Only

For Climate Menu do the following in APIM:
7D0-01-01 xxxx xxx3 xxxx
7D0-01-02 xxxx x2xx xxxx