FORScan - software to enable/disable features in your truck
#8521
Thanks. Maybe I should have been more clear. I purchased the app based remote start and am curious as to how to turn it on in Forscan, or do I need to take to the dealer to get it turned on?
#8523
Senior Member
Originally Posted by J.beard
Ok I'll ask again. Is it possible to add the "miles to e" underneath the gauge on a 16 XLT?
#8524
Senior Member
Install it yourself using the attached instructions. Then contact the dealer where you bought it and they activate it for cell phone access.
#8525
On down the highway
iTrader: (4)
Join Date: Aug 2014
Location: Not far enough away from Chicago
Posts: 24,992
Received 1,679 Likes
on
1,094 Posts
must have made different xlts. My 16 has it under the trip meter section. Shows mpg, time on that trip..and at all times, shows miles till empty, regardless if the trip meter reset
#8526
Originally Posted by gatorblue92
Don't know how I never ventured in this thread until now but there is a lot of great info here and in the how-to.
For those who have added navigation to their MFT Sync 2 are you using the A6 or A7 nav SD card? I'm going to turn this feature on with Forscan but wanted to make sure I get the right card.
For those who have added navigation to their MFT Sync 2 are you using the A6 or A7 nav SD card? I'm going to turn this feature on with Forscan but wanted to make sure I get the right card.
Could anyone chime in and direct me to where I could find the info pls? Or just give me the yay or nay to whether I should bother doing it ? Cost wise? I have a tom tom already but if it's an easy mod and not ridiculously expensive I wouldn't mind giving it a try.
Thanks.
#8527
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
I have read the entire forum a few times now , and have done a few of the forscan mods. I can't seem to find the info I am looking for to find out if it's a fairly easy and not too expensive mod to add navigation to a 2015 xlt.
Could anyone chime in and direct me to where I could find the info pls? Or just give me the yay or nay to whether I should bother doing it ? Cost wise? I have a tom tom already but if it's an easy mod and not ridiculously expensive I wouldn't mind giving it a try.
Thanks.
Could anyone chime in and direct me to where I could find the info pls? Or just give me the yay or nay to whether I should bother doing it ? Cost wise? I have a tom tom already but if it's an easy mod and not ridiculously expensive I wouldn't mind giving it a try.
Thanks.
#8528
The FORScan Guy
Thread Starter
I have read the entire forum a few times now , and have done a few of the forscan mods. I can't seem to find the info I am looking for to find out if it's a fairly easy and not too expensive mod to add navigation to a 2015 xlt.
Could anyone chime in and direct me to where I could find the info pls? Or just give me the yay or nay to whether I should bother doing it ? Cost wise? I have a tom tom already but if it's an easy mod and not ridiculously expensive I wouldn't mind giving it a try.
Thanks.
Could anyone chime in and direct me to where I could find the info pls? Or just give me the yay or nay to whether I should bother doing it ? Cost wise? I have a tom tom already but if it's an easy mod and not ridiculously expensive I wouldn't mind giving it a try.
Thanks.
** This is only for Sync 2
#8530
I'm hoping someone can help me out with global windows. I've followed the procedures for programming global windows, but it is not working. I have only modified a couple of things in Forscan (activating subwoofer and changing the kicker speaker settings), and it has worked, so I feel like I know what I am doing, but this is not working.
Is there a trick to programming this one? A sequence I might be missing? Is removing the key and then turning the truck back on sufficient for the off/on cycle?
(I've also used various delays and made multiple attempts to attempt the keyfob to recognize my input). Also, I have a 2017 STX if that might make a difference.
Is there a trick to programming this one? A sequence I might be missing? Is removing the key and then turning the truck back on sufficient for the off/on cycle?
(I've also used various delays and made multiple attempts to attempt the keyfob to recognize my input). Also, I have a 2017 STX if that might make a difference.