FORScan - software to enable/disable features in your truck
#5971
Senior Member
Bob, just FYI you can close the windows by just holding the lock button. You don't need to push it twice like you do to roll down
The following users liked this post:
Livoniabob (01-31-2017)
#5972
Senior Member
#5973
The FORScan Guy
Thread Starter
#5974
Senior Member
I didnt think on the 15+ that it could be changed with IDS as the dealers cant change it. thats why a speedo calibrator or forscan(with a DTC). has this changed with IDS versions?
#5975
The FORScan Guy
Thread Starter
#5976
#5977
If you got it to work on an XLT please share the solution.
On my XLT auto climate will simply set the current temperature to max fan speed.... But at no time does the auto climate readjust the temperature or fan speed on its own.
#5978
Senior Member
There's many of us who have done this upgrade and none of us have gotten auto climate to work so unless you already previously had auto climate before the swap I don't think auto climate will work.
If you got it to work on an XLT please share the solution.
On my XLT auto climate will simply set the current temperature to max fan speed.... But at no time does the auto climate readjust the temperature or fan speed on its own.
If you got it to work on an XLT please share the solution.
On my XLT auto climate will simply set the current temperature to max fan speed.... But at no time does the auto climate readjust the temperature or fan speed on its own.
I have an XLT 302A. The bezel came out of a Lariat 501A. All I did was load my as-built from my 302A FCIM into the 501A FCIM using ForScan.
The only functions that do not work are heated seats and dual temperature. Everything else works just like it should.
Last edited by bhamilton; 01-31-2017 at 04:07 PM.
#5980
The FORScan Guy
Thread Starter