When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Forgive me if this has been discussed but is there a way to remove the navigation restrictions while driving. It was a hassle during our last time when we were driving and wanted to find a restaurant. My wife could not access the POI searching function without us stopping.
If you have a 2015 w/Sync 2 you can set APIM to allow NAV at any speed: APIM 7D0-02-01 5753 xxxx xxxx, but I think you may lose the Sirius Travel Link. I did this, and can now enter destinations, search for POIs, and make calls from the phone book at highway speeds.
Not with Forscan. If you don't have the 360 camera, you could install Lockpick. It bypasses some of the restrictions and opens up other options as well.
Does lockpick work with sync3? From what I read lockpick air only supports up to 2015, I have a 2016
Forgive me if this has been discussed but is there a way to remove the navigation restrictions while driving. It was a hassle during our last time when we were driving and wanted to find a restaurant. My wife could not access the POI searching function without us stopping.
Yes this can be done via FORScan. I did it on my Sync2. Someone please correct me if I'm wrong but I believe it's in the APIM module. I looked in the spreadsheets but couldn't find it spelled out as it used to be...
If you have a 2015 w/Sync 2 you can set APIM to allow NAV at any speed: APIM 7D0-02-01 5753 xxxx xxxx, but I think you may lose the Sirius Travel Link. I did this, and can now enter destinations, search for POIs, and make calls from the phone book at highway speeds.
This is absent from the spreadsheets. Need update Livin.
Yes this can be done via FORScan. I did it on my Sync2. Someone please correct me if I'm wrong but I believe it's in the APIM module. I looked in the spreadsheets but couldn't find it spelled out as it used to be...
Thanks for the reply, I have a 2016 F150 with sync3 though so hopefully it can still be done.
I took some interesting screen shots from the 2018 F-150 promotional video...
360 camera....JPEG of truck missing..wonder where that is stored? Maybe we could change it? The home screen has the seat and heated wheel buttons on it.
Will be interesting to see if we can activate the active cruise stop and go traffic feature or pedestrian detection...
Also looks like an extra button by the 360 cameral? Maybe a Bang-Olufsen tweeter up by the center channel speaker?
Last edited by 16F150LIMITED; 01-10-2017 at 10:00 AM.
I tried the following this morning while I had my truck configured for Canadian forced DRLs and it worked.
BCM: 726-26-02 x1xx xxxx xxxx - Parking lamps on with low beams for DRL
I made this change, but nothing happend.
How to configure the Canadian forced DRL's?
I found just info on how to Disable Canadian forced DRLs.
Livnitup
Maybe you know why this wierd things are happening:
In my car's AS BUILT, the default code for the DRL was 108E (this value is stated everywhere the one for Dedicated DRL).
The only other code from your list that can be writen in AS BUILT is 017F which turns it OFF.
For all the others I get the error "Incompatible configuration".
I leave it as 108E, and I go into IPC module "PIDs", and next to the Daytime Running Ligths I see that is stated "Incorrect value..." instead of Dedicated DRL.
When I open the selectable options, I have this
I try to change it to 10-Dedicated DRL
and I get this:
Then I try to change it 1-None, and it works
And the most weird thing is that none one the rest of the options can be written but 16-Incorrect value or not configured:
Do you know why in our russian cars the 108E in AS-BUILD is related to 16-Incorrect value or not configured and to the halogen lamp instead of 10-Dedicated DRL?
What would be the code in AS-BUILD for the 10-Dedicated DRL and the Signature Lighting?
And why I can't write the 10-Dedicated DRL in "PIDs"?
This is a fantastic effort guys. Who said that you can't work on or modify your own car now with all the computers?
I just picked up for 2016 Screw XLT 302A on Saturday. Was able to add the heated seats and climate control to Sync 3 using my cheap Chinese WiFi OBD2 adapter.
Been scouring around the net for a cheaper Canadian option for the OBDLink MX. It's ~$230CAD on Amazon and ordering from the US can be a PITA.
I did find these guys who are charging $115CAD plus $15 shipping. I found a coupon code online to save 5% (FSG1T). Ends up being just over $120 CAD when everything is done.
01-10-2017, 08:56 AM
