FORScan - software to enable/disable features in your truck
11-27-2016, 08:19 PM
#3421
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
The following users liked this post:
longbedbob (11-27-2016)
11-27-2016, 08:25 PM
#3422
Old Fart
11-27-2016, 08:52 PM
#3423
Hey guys I've being messing with the forscan and love what you guys are doing with all this findings!! I don't know much about computers and can't figure out all the stuff you guys are finding !! Anyway love it just need a little bit of help lol on my truck 2016 lariat. The 12 v outlet and the ac110v outlet can I get it to work with everything off? If so would that be the (PowerPoint timeout)? Also on my wife's 2016 xlt she has sync 3 but not the climate settings like on mine can y add it? What about the nav?
Thanks in advance for everything also are you guys taking donations? If so where?
Thanks in advance for everything also are you guys taking donations? If so where?
11-27-2016, 08:58 PM
#3424
The FORScan Guy
Thread Starter
Hey guys I've being messing with the forscan and love what you guys are doing with all this findings!! I don't know much about computers and can't figure out all the stuff you guys are finding !! Anyway love it just need a little bit of help lol on my truck 2016 lariat. The 12 v outlet and the ac110v outlet can I get it to work with everything off? If so would that be the (PowerPoint timeout)? Also on my wife's 2016 xlt she has sync 3 but not the climate settings like on mine can y add it? What about the nav?
Thanks in advance for everything also are you guys taking donations? If so where?
Thanks in advance for everything also are you guys taking donations? If so where?
11-27-2016, 09:05 PM
#3426
I know there is a lot of talk about the tilt mirrors on reverse. I had time this afternoon to test this out. After setting things up I tried it and things worked but I got the clicking. I then selected the left mirror, put in to reverse and adjusted where I wanted it, then shifted to park and hit the #1 on my door for about 5 seconds or so. No beep but tested and it worked. I then did this for the right mirror and it it worked.
The only problem I had was I had to select which mirror I wanted to tilt down in order for it to work. It would never do both of them at the same time when putting it in to reverse. I have not had time to play around with things as I have been busy all day but wanted to see if anyone had any thoughts
The only problem I had was I had to select which mirror I wanted to tilt down in order for it to work. It would never do both of them at the same time when putting it in to reverse. I have not had time to play around with things as I have been busy all day but wanted to see if anyone had any thoughts
11-27-2016, 09:10 PM
#3427
It's my first day
I got some more stuff for someone to test... was bored after eating turkey!
REVERSE TILT/DIP AND AUTOFOLD SIDE MIRRORS
- Requires Motorized Mirrors to be installed (except for reverse dip).
IPC
720-02-01: xxxx Fxxx xx
DDM and PDM
Pick one for 03-01:
740/1-03-01: A800 xx - Master Enable for Auto Fold ONLY
740/1-03-01: B800 xx - Master Enable for Auto Fold and Reverse Tilt/Dip
740/1-03-01: F800 xx - HEATED/DEFROST MIRRORS ONLY - Master Enable for Auto Fold and Reverse Tilt/Dip
AND
740/1-03-01: xx4x xx - Adding a 4 after your mod choice above will enable the new Lincoln Style Autofold (OPTIONAL)
740/1-12-01: FCxx - Auto Fold
740/1-13-01: FCxx - Reverse Tilt/Dip
You may have to go into Mirror Settings under Vehicle in IPC to turn both these features on after changing code.
If AutoFold Mirrors doesn't work with these changes the DDM/PDM firmware on your truck may not support the feature.
To Use Reverse Side Mirror Dip:
Before shifting into reverse, select the mirror you want by pressing the left or right mirror control button. Then shift to reverse, it should dip.
- Feel free to let me know if both or either of these works for you or make a donation if you want!
HAPPY THANKSGIVING
REVERSE TILT/DIP AND AUTOFOLD SIDE MIRRORS
- Requires Motorized Mirrors to be installed (except for reverse dip).
IPC
720-02-01: xxxx Fxxx xx
DDM and PDM
Pick one for 03-01:
740/1-03-01: A800 xx - Master Enable for Auto Fold ONLY
740/1-03-01: B800 xx - Master Enable for Auto Fold and Reverse Tilt/Dip
740/1-03-01: F800 xx - HEATED/DEFROST MIRRORS ONLY - Master Enable for Auto Fold and Reverse Tilt/Dip
AND
740/1-03-01: xx4x xx - Adding a 4 after your mod choice above will enable the new Lincoln Style Autofold (OPTIONAL)
740/1-12-01: FCxx - Auto Fold
740/1-13-01: FCxx - Reverse Tilt/Dip
You may have to go into Mirror Settings under Vehicle in IPC to turn both these features on after changing code.
If AutoFold Mirrors doesn't work with these changes the DDM/PDM firmware on your truck may not support the feature.
To Use Reverse Side Mirror Dip:
Before shifting into reverse, select the mirror you want by pressing the left or right mirror control button. Then shift to reverse, it should dip.
- Feel free to let me know if both or either of these works for you or make a donation if you want!
HAPPY THANKSGIVING
You still never sent me your address. I still feel I owe you a big glass bottle of Canada's finest maple syrup!
11-27-2016, 09:15 PM
#3428
Senior Member
Some of the aftermarket cameras modules I've played around with from Amazon have a firmware that controls camera lines and some don't. I don't know if the guide lines on Ford vehicles are embedded in the camera or if they are software controlled by sync. Either way, I figure it's worth a shot to find out. My problem is this time of year I'm busy non stop and have little time to mess around.
lol, I'm actually trying these things at work on day off while waiting in between email correspondence. Another day well wasted.
lol, I'm actually trying these things at work on day off while waiting in between email correspondence. Another day well wasted.
2014 Explorer Limited (Sons Car) has the parking lines that bend/turn with the direction you are turning the wheels. I would like that on my 13.
11-27-2016, 09:19 PM
#3429
Senior Member
11-27-2016, 09:32 PM
#3430
It's my first day
On the topic of mirrors I'm just thinking about how power fold functions in different ways with the same switch. It may help uncover how we can get away from individually selecting right or left only for auto dip.
An F150 for example:
With power fold & power scope mirrors. If you press the power fold button nothing happens right away, the mirrors both become active and wait for an input command from the '+' pad. Up & Down = power fold, left & right = power scope.
With power fold & NO power scope. if you press the power fold button both mirrors fold in right away.
So, I'm thinking that if you copy code from a Ford which has power scope enabled, then maybe auto dip might work on both mirrors at the same time if you press the power fold button before shifting into reverse.
I really have no idea, it's just that I can't test it physically at the moment so I'm trying to think of things to try.
Does anyone here know which bits or address changes enable power scope?
An F150 for example:
With power fold & power scope mirrors. If you press the power fold button nothing happens right away, the mirrors both become active and wait for an input command from the '+' pad. Up & Down = power fold, left & right = power scope.
With power fold & NO power scope. if you press the power fold button both mirrors fold in right away.
So, I'm thinking that if you copy code from a Ford which has power scope enabled, then maybe auto dip might work on both mirrors at the same time if you press the power fold button before shifting into reverse.
I really have no idea, it's just that I can't test it physically at the moment so I'm trying to think of things to try.
Does anyone here know which bits or address changes enable power scope?
Last edited by Airborne_Ape; 11-27-2016 at 09:37 PM.