When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
They all have settings in the IPC but they also have a hard button. Are you sure she doesn’t have it on the column as shown below. I seriously doubt they make two different versions of the same system and the Ranger owners manual makes no mention of a model without the button. If it’s working for you I guess it really doesn’t matter but I would still add button.
You are 100% correct. I must have missed the button I’m not sure why I even made that comment that there must be different versions. I didn’t have my morning coffee before I replied.
The hardware button just disables the system completely whereas the IPC lets you changes modes, alerts, and sensitivity.
At the end of the day you don’t need the hard button for the system to work, but only to fully disable the system.
Last two characters are a checksum, will never be the same if you changed anything. Program calculates them on the fly.
Yes but the notes say to change last 2 to 92 in IPMA, I cannot make that stick, the lines do not show up on the IPC. The recalibrate procedure seemed to work ok.
Here are the asbuilt values used. IPC: 720-02-01 xxEx xxxx xxxx IPMA: 706-01-01 xxxx x94x xx92 PSCM: 730-02-01 xxxx x1xx x1xx
Yes but the notes say to change last 2 to 92 in IPMA, I cannot make that stick, the lines do not show up on the IPC. The recalibrate procedure seemed to work ok.
Here are the asbuilt values used. IPC: 720-02-01 xxEx xxxx xxxx IPMA: 706-01-01 xxxx x94x xx92 PSCM: 730-02-01 xxxx x1xx x1xx
Don't worry about the last 2. Those where highlighted to show what changes where made. Not specifically that you have to change them. Also, If you have a 2019 I'm not sure that it will work. I added it to my 2018 and a few others have verified it worked on their 2018 but no dice with 2019s yet.
Don't worry about the last 2. Those where highlighted to show what changes where made. Not specifically that you have to change them. Also, If you have a 2019 I'm not sure that it will work. I added it to my 2018 and a few others have verified it worked on their 2018 but no dice with 2019s yet.
Yes, ignore the last two. Sorry for the confusion.
Don't worry about the last 2. Those where highlighted to show what changes where made. Not specifically that you have to change them. Also, If you have a 2019 I'm not sure that it will work. I added it to my 2018 and a few others have verified it worked on their 2018 but no dice with 2019s yet.
I didn't realize this doesn't work on the 2019's..
I didn't realize this doesn't work on the 2019's..
It might, I was just stating that i've only seen it work on 2018s. if someone with a 2019 is messing with it can you please let me know what value you have at 724-01-01 *xxx-xxx-x
11-05-2019, 10:07 AM
