That's the post processing of the maps data. give it 15-20 minutes. Then all will be good.

 

ok had to shut off the truck hopefully all is well after I hop in later. Thanks!

 

Upgrade was successful for me.

However, Android Auto only seems to work when my phone is plugged in with a USB cable. I thought AA didn't require the phone being plugged in?

'16 Lariat 502a.

 

For all the 2016 Mustang drivers out there thinking about doing this CarPlay upgrade themselves I can confirm two things. The NON NAV software installers worked flawlessly with no issues. I am now successfully upgraded to v2.2 from v1.1. Second, there are two USB modules out there. The OFFICIAL Ford USB module is part #HC3Z-19A387-B. As of right now it is on severe backorder and Ford is not even quoting an estimated shipping date. The UNOFFICIAL USB module part #GJ7Z-19A387-B
which is for the Lincoln Navigator (I got mine at a local Ford dealership parts department) is almost identical to the official Ford part, the only difference is the edge of the USB ports light up in blue on the Ford, white on the Lincoln. I can confirm that even though the original 2016 Mustang Hub has one USB port and the part listed above has 2 USB ports the part is almost identical and fits like a glove. The one exception is, ironically, that there are TWO USB inputs feeding into the single USB port on the original part, where on the new part there is just ONE USB input for the two combined ports. I plugged in the USB with the GREY head into the Lincoln part and VOILA!!! CARPLAY!!! Part fits like a glove. Whole process took less than 10 minutes. Use a trim tool (think plastic flathead screwdriver) to gently pry the hub out (from the arm console between the two front seats). Unplug the three cables, take the new part, plug in the grey power cable and the grey USB cable and if you already have the Sync 3 2.2 upgrade installed you are all set. So far in 3 hours of driving I have had no issues. Only other recommendation I would make is to delete your phone from your sync system and re-add it like it was a new device. Best of luck everyone!!

 

Both require physical connection at this time.

 

After updating, navy now shows road speed limit even if no route is planned.

 

This has been said MULTIPLE times in just the past few thread pages alone. People need to actually read.

 

It'll be neat if they allow the integrated wifi module to do wireless AA in the future, I wonder if the carplay updated usb connectors in the plastic box on the dash push more amps to the port than the stock '16 connectors. Nexus 6p charges glacially slow on the integrated USB. If it were wireless I could just use the 12v to 5v 3a type c charger and it'd work normally. no interest in carplay but if the updated hub would mush more amperage into the connector I'd pay for it and install it.

 

Link to Non - Nav Sync 3 Update From mcrcracer

https://docs.google.com/uc?export=do...UYyT2l0Zkl3S28

I downloaded this file and can confirm it works perfect.

 

i downloaded the zip files today and updated to 2.2 Used AA on the way home from work. Worked great, this is what I thought I was getting from the beginning.