When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
That’s Freaking awesome! Thxs for posting that. Do u think theres anyway to add it to the 360 camera button if trucks already equipped with the existing cameras?
Anyone on here been able to figure out how to go that route?
I have a question about pulling a trailer. I would like to use my trailer backup camera with my sync 3 systems. Is there a way that I can plug the trailers camera into the rear backup camera on the truck so I can see the rear view of the trailer from my truck screen. I have a 2018 Lariat with all six or so cameras, just dont see and aux connnection
I haven't figured out how to going forward. I can switch between the cameras while in reverse.
SYNC software only enables the rear camera signal when placed in reverse. you'd somehow have to tap into the signal for the front camera but then it would only activate below a certain MPH.
Bump. Now that the '21s come with a chmsl camera from factory, I'd like to explore retrofitting this to my '19 with 360 camera.
Anyone ever happen to play with the SuperDuty chmsl camera?
Thet have a few kits available that will let you see all the newly added cameras anytime you want by holding down the volume button for a few seconds. Plug and play.
Thet have a few kits available that will let you see all the newly added cameras anytime you want by holding down the volume button for a few seconds. Plug and play.
Using the OEM chmsl camera, or an aftermarket camera only?
I’m working on the 3rd brake light camera I have mounted the camera ,,and send the harness to the ipmb attached all the wires but no success..I’m going to try with f250 ipmb
I have ordered a 2019 f250 ipmb so when that arrives I’ll let you guys know
Last edited by gio76; Aug 9, 2021 at 04:44 PM.
Reason: Miss spelled
I got it working on my super duty using a Naviks interface from Camera Source. Routed the camera output via RCA plug and can now view the camera at any time even when driving.
Originally Posted by dutch.
Using the OEM chmsl camera, or an aftermarket camera only?
OEM CHMSL camera.
I'm currently working on a project now to utilize the OEM camera button to flip through the different video inputs when up on the screen.
Last edited by Magnetic157; Aug 9, 2021 at 04:24 PM.
I’m working on the 3rd brake light camera I have mounted the camera ,,and send the harness to the ipmb attached all the wires but no success..I’m going to try with f250 ipmb
I have ordered a 2019 f250 ipmb so when that arrives I’ll let you guys know
Have you made any progress on this? I’m about to start acquiring the parts I need to add a 360 camera to my 2018 502A. I’d like to add the bed camera too if possible.
