Ebay

 

I got one from the dealer once, they might still have them. Now I have several spares from old trannys.

 

saw nothing on ebay, going to junkyard to look shortly

 

Here you go, off ebay motors

http://cgi.ebay.com/ebaymotors/Ford-...Q5fAccessories

http://cgi.ebay.com/ebaymotors/18-TO...Q5fAccessories

http://cgi.ebay.com/ebaymotors/Ford-...item53daeda018

 

alright guys, i got some gears from junkyard, yellow one did not work at all. then i tried a red one, worked for about 2 miles then stripped out, then tried a light brown one (think its brown, haha) worked for about 2 miles then once again stripped out, any ideas due to these results? i really want to drive my truck just got some new 33x12.50LT15 MT baha MTZ with my 15x10 and i cant drive, need fixed asap. thank you very much in advance

 

I snapped my speedometer cable when I removed the cluster because I didn't push the cable back down and it was binding. Something isn't letting the cable spin freely so make sure the cable doesn't have any tight bends.

 

x2.

 

everything is brand new, including cable. it spins freely with no problem

 

Next step I would pull the cluster and go for a drive so I could watch the cable spin.

 

okay, did this, it spun, i took it all apart then i hooked a drill up and spun some Pb blaster into cable to lubricate and cable snapped, waiting on new one from store. i am just really lost. lol. when it was working the needle would jump between a 5mph section. as in 25 to 30 and so on. once let up off of gas pedal the speedometer would jump down by 10 mph or so. is that a cable problem?if so how do i correct this so it will work correctly?