hi guys! my 90 302's firing order is 15426378?

the distributer goes counter clockwise?

the cylinders are 1234 on the passenger's side and 5678 on the drivers?

(starting from the grill back)

is all this correct?

 

 

Yep,make sure #1 is in the right spot and u should be good to go. There is a preferred layout on the wires on cross over on 7,8 and one more wire but I don`t remember it.

 

thanks you, but ive tried both of these firing orders and neither of them are working for me. my truck tries to start and after a second it dosent want to crank, but will keep cranking and repeats every few seconds.

it ran and fired fine before, not sure what changed

 

Did you change the whole distributor?

 

You should know u need 2 pull codes. Or keep shooting in the dark. Don`t matter 2 me.

 

i changed the distributer cap, rotor, wires, and plugs.

it will crank fine now but still wont start

 

i thought the new distributer cap and rotor might have been bad so i put the old ones back in but still didnt work

 

I have spark, I have fuel. I reset the computer. I can't figure out what's wrong. Thanks for the help!

 

You've got the wires on wrong.