Topic Sponsor
Members Builds See any build threads created by members to track progress of their projects.
Sponsored by:
Sponsored by:

2017 screw 5.0 4x4 build - goal - storm trooper

Thread Tools
 
Search this Thread
 
Old 10-01-2021, 09:34 PM
  #21  
Senior Member
Thread Starter
 
flvol77's Avatar
 
Join Date: May 2017
Location: Orlando, Florida
Posts: 210
Received 155 Likes on 76 Posts

Default

I ordered a things from F150 Leds and they came in today.

I removed the console, used double sided tape, and secured double tape for the LED strips.







Old 10-01-2021, 09:53 PM
  #22  
Senior Member
Thread Starter
 
flvol77's Avatar
 
Join Date: May 2017
Location: Orlando, Florida
Posts: 210
Received 155 Likes on 76 Posts

Default

Installed rough country tow hook shackle mounts. These were a lot easier than I thought they would be.

it’s a process - easiest way I felt to do it, flat head screw driver jammed in behind the rubber and pull down.

also when removing the bolts, remove the front one but make sure NOT to fully remove the second one. Loosen it up, and the hooks slide out.

I like the look, I also added one in the back.

Here are the links for what I added.

Rough Country Tow Hook Shackle Mount Kit for 2009-2020 F150 - RS150, Black
Amazon Amazon


AUTMATCH Shackles 3/4" D Ring Shackle (2 Pack) 41,887Ibs Break Strength with 7/8" Screw Pin and Shackle Isolator & Washers Kit for Tow Strap Winch Off Road Vehicle Recovery White & Black
Amazon Amazon


AUTMATCH Shackle Hitch Receiver 2 Inch with 3/4" D Ring Shackle and 5/8" Trailer Hitch Lock Pin, 35,000 Lbs Break Strength, Heavy Duty Receiver Kit for Vehicle Recovery, Black & White
Amazon Amazon




















Old 10-01-2021, 10:07 PM
  #23  
Senior Member
Thread Starter
 
flvol77's Avatar
 
Join Date: May 2017
Location: Orlando, Florida
Posts: 210
Received 155 Likes on 76 Posts

Default

Love the Morimoto headlights and I replaced the grill, I really don’t like the white FORD lettering.

only issue

I put LED signal bulbs from headlight revolution (customer service left a lot to be desired)

once I got everything put back together, I realized one of the switchbacks wasn’t working.

So that will be a project for another day, oh well, I think everything looks good.












The following users liked this post:
ManMountainDean (10-02-2021)
Old 10-02-2021, 12:00 AM
  #24  
Dielectrically 5w30
 
[F2C]MaDMaXX's Avatar
 
Join Date: Jan 2020
Location: Oregon
Posts: 12,661
Received 5,021 Likes on 3,280 Posts
Default

I didn't want to say anything about the white lettering, normally i like PTM stuff, but that didn't work for me - so yeah, the black plastic works better IMO too.

I'm wary of leaving anything like that in my hitch in case someone wanders off with it - i like those, though i opted for soft shackles for up front and a hitch shackle like yours when needed, all kept under the rear seat.
Old 10-02-2021, 07:49 AM
  #25  
Senior Member
Thread Starter
 
flvol77's Avatar
 
Join Date: May 2017
Location: Orlando, Florida
Posts: 210
Received 155 Likes on 76 Posts

Default

Originally Posted by [F2C]MaDMaXX
I didn't want to say anything about the white lettering, normally i like PTM stuff, but that didn't work for me - so yeah, the black plastic works better IMO too.

I'm wary of leaving anything like that in my hitch in case someone wanders off with it - i like those, though i opted for soft shackles for up front and a hitch shackle like yours when needed, all kept under the rear seat.
The hitch piece has a lock on it, but I know what you mean about the shackles, I am worried they may disappear also. Sitting at Discount Tire getting wheels and tires right now, I will post pics later today.
The following users liked this post:
[F2C]MaDMaXX (10-02-2021)
Old 10-02-2021, 06:27 PM
  #26  
Senior Member
Thread Starter
 
flvol77's Avatar
 
Join Date: May 2017
Location: Orlando, Florida
Posts: 210
Received 155 Likes on 76 Posts

Default

Put the new running boards on, also running board leds, and painted my exhaust black.

have to admit I really like the truck without running boards, funny my wife hated the way it looked.













Old 10-02-2021, 06:32 PM
  #27  
Senior Member
Thread Starter
 
flvol77's Avatar
 
Join Date: May 2017
Location: Orlando, Florida
Posts: 210
Received 155 Likes on 76 Posts

Default

Wheels and tires 285/65/20 with XD Heist -18 mm offset

No rubbing

also took it to a local shop and got an alignment done.

odd seeing someone else driving my truck, before wheels and tires and after.

I actually think I could have gone bigger (100% sure I could have) didn’t want to because of the weight. Went with BFG KO2
















Old 10-02-2021, 11:04 PM
  #28  
Dielectrically 5w30
 
[F2C]MaDMaXX's Avatar
 
Join Date: Jan 2020
Location: Oregon
Posts: 12,661
Received 5,021 Likes on 3,280 Posts
Default

Getting a load of progress made here

No rubbing on full lock? (that's where it'll rub if it's going to, and, in reverse oddly)
The following users liked this post:
ManMountainDean (10-03-2021)
Old 10-03-2021, 01:03 AM
  #29  
Senior Member
Thread Starter
 
flvol77's Avatar
 
Join Date: May 2017
Location: Orlando, Florida
Posts: 210
Received 155 Likes on 76 Posts

Default

Originally Posted by [F2C]MaDMaXX
Getting a load of progress made here

No rubbing on full lock? (that's where it'll rub if it's going to, and, in reverse oddly)
Nope, no rubbing on full lock, discount put one wheel on and tested it before moving forward because I told them I wasn't going to touch the crash bars, so if they rubbed we would get a different sized tire.

I trying to figure out the next mods lol - the truck is still under warranty until May of 22 so I will probably wait until then for a tune (although the service manager at my Ford Dealership told me that he could care less if I had a tune on my truck, if something went wrong he was going to fix it, as long as it wasn't something I did that was stupid), throttle body, etc - I am going to have my resonator removed, I should have bought the attack Borla exhaust. I know the attack has a resonator and no muffler. But, I think I will keep the muffler and remove the resonator.

I may add lighted vanity mirrors, new speakers are coming, I put in a pair about 3 years ago and they don't sound as good as I want. Raptor steering wheel, probably the Raptor 3rd brake light, I like the smoked one I have but it ends there, I don't like the light it produces.

Back up lights (from F150 LEDs)

Down the road maybe the Amp Research running boards.

Right now it's about our pool, and getting the backyard done, we may be doing a hot tub and of course, we want a hot springs and they aren't cheap. lol

Not sure I will ever be done and then it will be time for a new one.

BTW my favorite mod, that pedal commander, wow the gas pedal response is flat out crazy.



The following users liked this post:
[F2C]MaDMaXX (10-03-2021)
Old 10-03-2021, 05:32 AM
  #30  
Senior Member
 
ManMountainDean's Avatar
 
Join Date: Nov 2017
Location: NoMo Coumo NY
Posts: 2,333
Received 2,888 Likes on 1,094 Posts

Default

Originally Posted by [F2C]MaDMaXX
Getting a load of progress made here
)
Gettin' it done! A man after my own heart. Truck looks good.


Quick Reply: 2017 screw 5.0 4x4 build - goal - storm trooper



All times are GMT -4. The time now is 04:04 PM.