Installed EDGE programmer!
#1
Senior Member
Thread Starter
Installed EDGE programmer!
Just got my Edge Evo Programmer in the mail this afternoon and as soon as I saw it I put it in. I haven't driven with it yet (so I may be posting again on here ) but once I do hopefully I will see an increase in MPG. All I can say is it turns on and works. I put the mount in the way they said too but there is still a little "lifting" on the right side. I didn't know if it is supposed to be like that or if I did something wrong. Its not that noticeable, so I don't care. The only problem I have so far is putting in my tire size. I have 35/10.5/20 and I don't know how to type that in to the programmer, since they have a formula. If someone could assist with that it would be awesome. Heres some pics.
#2
Nice. Mine's different as it's a different year, but it took some extra 3M tape, and a good scrubbing with alcohol to get mine to stick tight.
Your tire size will be 2792 mm. If your tire is a true 35". I couldn't find a 35/10.5 20 listed to get the exact diam.
A word of caution.....Did you read the warning in the manual about using a CIA in conjunction with the Edge in the manual for the 2004 and up trucks?
Your tire size will be 2792 mm. If your tire is a true 35". I couldn't find a 35/10.5 20 listed to get the exact diam.
A word of caution.....Did you read the warning in the manual about using a CIA in conjunction with the Edge in the manual for the 2004 and up trucks?
Last edited by skizriz; 05-03-2011 at 08:20 PM.
#5
Senior Member
Thread Starter
Your tire size will be 2792 mm. If your tire is a true 35". I couldn't find a 35/10.5 20 listed to get the exact diam.
A word of caution.....Did you read the warning in the manual about using a CIA in conjunction with the Edge in the manual for the 2004 and up trucks?
Trending Topics
#8
Senior Member
Thread Starter
#9
I Like Tires
I put the mount in the way they said too but there is still a little "lifting" on the right side. I didn't know if it is supposed to be like that or if I did something wrong. Its not that noticeable, so I don't care. The only problem I have so far is putting in my tire size. I have 35/10.5/20 and I don't know how to type that in to the programmer, since they have a formula. If someone could assist with that it would be awesome. Heres some pics.
Last edited by BassAckwards; 05-03-2011 at 10:01 PM.
#10
Senior Member
Thread Starter
Just push it down between the crack in the dash where it is raised up, that helps it stay more secure and then it will be flush for you. As for your tire size you need to put in 3022mm If your tires are about .5" smaller or taller than subtract or add about 12mm respectively.
scratch that... I just looked at you truck. But do you know what gears to put? I have stock so 3.73?