Just Ordered A 2/4 drop
Senior Member
Joined: Dec 2010
Posts: 488
Likes: 13
Originally Posted by DJM/BELLTECH DIRECT
i think you can get that front a tad lower with drop struts
Senior Member
Joined: Jun 2009
Posts: 1,656
Likes: 138
From: Arizona
Senior Member
Joined: Dec 2010
Posts: 488
Likes: 13
Originally Posted by azmidget91
I have the djm flip with 2" shackles and a notch, and djm 2.5 arms with 2" belltech spindles
4.5/8
Senior Member
Joined: Jun 2009
Posts: 1,656
Likes: 138
From: Arizona
there is your problem right there, you need to measure from the center of the wheel to the fender. takes out the factor of different tires/tire pressure. the djm instructions even mention this
F150 SUSPENSION GURU
Joined: Sep 2008
Posts: 1,932
Likes: 116
From: SAN FRANCISCO
F150 SUSPENSION GURU
Joined: Sep 2008
Posts: 1,932
Likes: 116
From: SAN FRANCISCO
Senior Member
Joined: Dec 2010
Posts: 488
Likes: 13
Originally Posted by DJM/BELLTECH DIRECT
wont align.
in front for plus 5 inches you would need 3 inch a arms and 2 inch spindles and will have to run at least a 22 inch wheel.
Senior Member
Joined: Jun 2009
Posts: 1,656
Likes: 138
From: Arizona
jsvo has 2.5 arms 2" spindles and 1" with the belltech struts
just a reminder my 4.5/8 drop is on a flare side that has the lighter fiberglass bed so more like a 4.5/6 drop compared to a styleside
just a reminder my 4.5/8 drop is on a flare side that has the lighter fiberglass bed so more like a 4.5/6 drop compared to a styleside