I've been looking to get a toolbox for my truck, but finding a size that fits has proven to be very difficult. I found one on Craigslist and width wise, it fits, but the depth is too deep and it hits the top of my wheel wells in my bed. I found a write up here on the forums about modifying to box to make it fit around the wheel wells by cutting and rewelding it so it fits around the wheel well, but I don't have the access to a welder.

I have looked online to no avail for the dimensions for this body style (2001 SuperCrew King Ranch 4x4) and want to know if anybody can either give me a link or two to some tool boxes you know for these trucks, or can tell me what dimensions are needed.

Any pictures you have with this truck and having a toolbox also attach pictures!

Thanks!!

 

There has been a thread about his. If you look long enough you will find it

 

Get a 69" UWS Lo-Profile Box. Fits perfect!

Wayne

 

Does it fit a 10th gen or your 2013 supercrew? -_-

 

I know some might knock the brand... but for me, I got nothing but good things to say about it. I wanted a low profile one, but the ones I found in my price range did not fit because of the wheel wells. Turns out, I love this deep box! Fit tons of stuff!!!

 

The 69" was in my 2013.

If you go to there website you can type in what truck you have and it will tell you.

Wayne

 

Mine is a 20x15x68 cam locker. Low profile. the bottom comes just above the hump. I seriously recommend a cam locker. Built to last, a awesome latch design. Carpet, struts, locks, everything. Its a great tool box and i wont ever buy anything different. I dont have any of the bed of the truck, but here is one from the side. Sorry for the quality.

The top is a little catywompus in the pic, i just had it powder coated when i took this pic and did adjust the latches yet.