Does anyone know how to reset the breaker for power windows. Ran tomorrow and windows down 1/3 of the way

 

No breaker, sounds like bad lift motor.

 

Check to see if you have power to the motor. Your pw relay may be shot.

 

The breaker resets itself on older vehicles. I don't know if the newer ones still have a breaker.

 

I think there is something by the passenger side of the truck in the foot area, but it might be for the locks.

 

Thats right. I found this out in a 97 Crown Vic. I held the button too long and I thought I blew something. A few minutes later it was fine. I like the idea actually.

 

There is a relay in the power distribution box under the hood. your owners manual will tell you the fuse , breaker , and relay locations.

good to check them

hey this is my first post

 

After reading these posts in search for my own solution, a abreaker makes sence to what happened to me and my truck.

Problem: My Window stopped working,(wife forced a frozen window down) all fuses are in tact, switch works by testing out on another F-150, checked relays, all seems well. Relay only clicks when switch is pushed for windows down. No Click for windows up, Passenger side works fine.

What I did:Bought a new motor, took apart panel, disconnected harness from old motor and connected new motor to check if this was going to be a motor problem, (I havent removed old motor yet) Under the switch everything was disconnected except the driver side window, I pushed the button for window up, new motor moves....great!! Pushed down....no good...plus the relay was clicking, I connected the passenger side to the switch, heard a click and now the driver side up and down button work.

Possible solution: There is a breaker in the motor or somewhere, because it took disconnecting the original motor and completeing a curcuit with the passenger side connector. Window works great now. Anyone else got evidence of a breaker?