I have 4 hi but no 4 low HELP PLEASE !!
#11
Senior Member
Thread Starter
#12
Senior Member
Thread Starter
#13
Mark
iTrader: (1)
#14
Senior Member
Thread Starter
#15
Senior Member
Man.... I thought B1450 was the wiper circuit.
#17
Mark
iTrader: (1)
I copied what he said the GEM code was... B1450 is the wiper. My Bad
#18
Senior Member
<------ still thinking it's a wet GEM module.
Has it rained/snowed, or anything lately Big D?
BTW, My Expedition had the B1450 code, which is why I thought it was the wiper circuit. I replaced the MF switch, and all the relays thinking it would clear up. It also had issues with the ESOF working properly, and would not go into 4 Low, and sometimes not A4WD or 4 High. In the troubleshooting of the issues, it threw me a dead giveaway two days later though when the truck tried to start on its own.
Has it rained/snowed, or anything lately Big D?
BTW, My Expedition had the B1450 code, which is why I thought it was the wiper circuit. I replaced the MF switch, and all the relays thinking it would clear up. It also had issues with the ESOF working properly, and would not go into 4 Low, and sometimes not A4WD or 4 High. In the troubleshooting of the issues, it threw me a dead giveaway two days later though when the truck tried to start on its own.
Last edited by white89gt; 01-22-2019 at 03:30 PM.
#19
Senior Member
Thread Starter
It's rained and snowed a lot recently although the 4 low problem started a while back .
My truck has a sunroof that is ALWAYS getting the drain holes plugged up and water will drip out of the bolt hole cover on the Oh Sh*t handle .
I will try changing the GEM today if I get a chance and see what happens .
Donny
My truck has a sunroof that is ALWAYS getting the drain holes plugged up and water will drip out of the bolt hole cover on the Oh Sh*t handle .
I will try changing the GEM today if I get a chance and see what happens .
Donny
#20
Senior Member
Thread Starter
My scanner says the B1450 code is - upshift selector / wheel plus switch malfunction low input
I'll double check later today and make sure I write the numbers for the code correctly .
I'll double check later today and make sure I write the numbers for the code correctly .