So I bought a 8000k xentec 9007 with the dual high and low beam set up and they will not work I've tried to reverse the polarity and different combos of the relay that plugs into the stock light power and on top of it all I've blown 3 fuses the bulbs will push in and out real quick but I think that's trying to change from high to low but still no light please help!!!

 

I had the same problem, I think I just put in a higher fuse and it was fine. If its a 15, put in a 20, and so on.

 

Mine had a 20 so you think putting a 25 in it would fix it? It seems like it would still come on at least for a minute ? Do you have the same set up as me? Same brand and everything?

 

I had some off brand 8k's in my Ranger and you would flip on the high's and it would blow, so I upped the fuse one and it was fine. You should see if others have any opinions, but thats what I did.

 

Mine won't come on in high or low it's nothing!

 

Can anyone else help??

 

both sides won't come on? because it may just be your ballast. try switching out the ballast from the other side and see if it will come on.

 

It can be that kit came out bad. It happend to a couple of friends of mine where it wont even turn on . They i read that sonetines they just come out bad. If it dosent work return them back .. When i put mines .on the second day one of the ballast when out .