i PUT 315/75/16 ON MY TRUCK ALL TIRE ARE GOOD WITH NO RUB BUT PASSENGER FRONT IT RUBS ON THE UPPER BALL JOINT/CONTROL ARM THAT IS NEW

 

Top pic is passenger side cv ,bottom is driver side cv . I am thinkin the angle is what is throwing my tire off but i don't know what else to do bit get get spacers,thanks in advance

 

I have a 2wd with 265 70 17 and mine is rubbing in the same spot on the sway bar, on both sides. I haven't been able to figure out why. I will have to keep an eye on this thread.

 

factory wheels?

 

It shouldnt rub with that size tire, i have a 2wd with 305/40r22 and it only rubs at almost full lock on my sway bars cuz there aftermarket hellwig bars and there alot thicker than the stock one. Do you have stock rims on?

 

yes its on the stock 16X7 rims and only rubs on passenger side

 

The alignment shop thinks something is bent,going back at 4pm to hopefully figure it out

 

Stock 16 rims and sway bars had it aligned and they said nothing about it. I did put 2'' coil spacer on it. But I wouldn't think that would make any difference. It doesn't rub if I just turn steering wheel all the way. Must be when suspension is in motion while turning.

 

something is bent or wearing out. i have the same size tire on my truck and im clear of the upper ball joints. the tires do rub on the frame at full chock.