rynbrdnr

I have been to every auto parts store in town and no one seems to have the rubber coupler that is needed for this mod. where in the world is everyone finding them?

please help...
thanks...

My01SCrew

Home Depot, think I found it in the plumbing department.

Collin

It's NOT an auto part. It's for plumbing. Any local hardware store will have them

rynbrdnr

Thanks a lot I didn't even think of that when I was there.

Collin

Happens to the best of us

Tootall28

I was tryn to do the gott mod and tore my rubber intake hose is the what y'all are talkn bout replacing cause I need one with a sensor hole in it.

O/C 9315

Too Tall,

I think you ripped your inlet tube,
hit the junk yards if you can't fix yours,

I did the mod they are talking about a few years ago,
they are talking about the rubber coupler that holds the filter or the pipe on.

Your talking about from the t/b to the mass air housing...

Good Luck!

rynbrdnr

Ive got everything I need for the Gotts mod is there anything I should know before I start tackling this. I have looked at many sites about this mod but I just want some incite from those of you who have actually done this mod...

Thanks...

My01SCrew

If you don't have one, I'd recommend a dremmel. I used a hack saw because it was the only thing I had available the time and it took a lot longer. It's pretty straight forward, just takes some patience.

Collin

I used a 3" tin air duct instead of the abs pipe. No shaping required