Does anyone know how to remove the bottom part of the bumper underneath the chrome on a 2003 F150 SuperCrew 2WD? The part where the license plate is..

 

should be bolts or push pins

 

Is it these?

 

Those push trees are for the painted cap...... If you can't figure that out you probably don't need to be removing the lower valence lol. It's held on with a bunch of 7mm bolts I believe.

 

X2. If you can't figure out how to loosen a couple bolt you probably shouldn't remove it.

 

I just pulled mine off this past weekend to paint it. The I circled in red holds the bumper onto the frame. You'll have those two and two on the other side. I couldn't tell from the picture, but you'll have about 8 others similar to the one I circled in yellow. those hold the lower valence to the chrome portion of the bumper. My plate holder was had two rivets holding the bottom portion on. I was pulling it anyway so I just drilled them out. Hope this helps...

 

Pic didn't post...

 

I think he's wanting the valence off. Not the whole bumper

 

I pulled the entire thing because it was easier to deal with. But the bolt circled in green are the ones to pull. Didn't notice it first time around.

 

I was gong to say the same thing. It is was easier to pull the bumper IMO rather than trying to get to those bolts while on the truck.