Engine Builders talk.
#6872
Senior Member
...
Last edited by Jbrew; 01-26-2015 at 02:49 PM.
#6873
Senior Member
#6874
Senior Member
What do yall think of this? Ignore the fact it's on a street though. But I think the stangs pretty bad ***.
http://instagram.com/p/rSqdGLQTOr/
http://instagram.com/p/rSqdGLQTOr/
#6876
Senior Member
iTrader: (2)
Perhaps he wants the entire harness , pre-made, pre bent. There's only two places I've found NEW vac harnesses, or complete emission harness (I've seen it refereed to that in the past as well "emission" ) - well actually 3 places. - Tasca, Ford Dealer and eBay. With eBay, I think it's Tasca's eBay store....not positive on that one. With Tasca, - always search both website and eBay store for those hard to find. These are very hard to find regardless, - for me anyway. Once in awhile you see them on the web, but you usually have to physically go to dealership and bring your routing info with yuh, since they are not all the same. Hard PVC or a composite is used so certain lines don't suck shut lol. What happens allot, elbows get pushed on these lines too far, restricting or blocking vac or installed without MEK. This chemical is used with elbow instillation. Dip the mini-tube hose ends in commercially available paint thinner containing Methyl Ethyl Ketone (MEK). This solvent will seal the mini-tube in the vacuum hose. Shake the service joint after assembly to ensure the solvent is dispersed and the vacuum line is not plugged. Btw, vac harness is sold in sections at the dealership. 4WD harness section and engine harness section.
You do realize the amount of vacuum a boosted enginge pulls? Well when no given throttle? Very easy to find better alt to stock components in hoses. Beside iac and brake booster, no worries.
#6877
#6878
Senior Member
#6879
Senior Member
#6880