I Have an edge cs programmer, I am in the process of replacing my head gaskets so the truck has been sitting for about a week in a half and the battery died. So I went to start it today to move it and my programmer wouldn't come on and the whole time the key was on it beeped and the screen wouldn't turn on. Just wondering if anyone else has had this problem and how can I fix it thank you

 

Hi.

Read this:

https://www.f150forum.com/f4/edge-cs-wont-turn-244056/

MGD

 

Ok I read that and I tried to hook it up to fusion and all it does when I hook it up is beep once and then nothing the screen won't light up or anything.

 

Hi.

Then it's time to call Edge Tech support. They will either try to recover it, or replace the unit.

Unfortunately, yer Stock calibration is still in there, so it is likely lost.

That thread details all of this.

Lesson learned - if yer truck is gonna have major downtime for repairs, always return the programmer to Stock and remove it form the vehicle.

Good luck!


MGD

 

Thanks for the help though man

 

Well my truck has a keyless entry system and the battery was dead when I went out so I had to crawl through my back window and open the door from the inside could that have done something to make this happen??

 

Hi.

Possibly.

Be sure to record all relevant information for Edge Tech Support, in case they ask.

MGD

 

Alright thanks for the help