I bought these lights off of ebay and i wanted to wire them to the headlights so that when the headlights come on so do these. http://www.ebay.com/itm/251997249349?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AITThese lights came with 2 wires on each. Black and red. How would i go about wiring these to the headlights. and what about placement?
thanks for the help

 

Turn on headlights and use a volt meter to check which wire has power. Then red goes to that wire and ground the black wire. Put then where you want.

 

I have some of those as my under hood lights. Pretty bright for that, no sure what they will do with headlights. Maybe if you wire them to the parking lights or just use them as DRL (which is what they are marketed as.

 

Did you wire those into the mercury switch that was originally used to light up the engine bay?

 

yes, used a 194 plug from an LED panel setup for it. Works quite well.

 

^ that's a nice set up. Do you mind taking a pic of where it's connected to?

 

Could you possibly send me a link to that? Please I want to do that too

 

This is what I got, just use the 194 bulb plug and splice into that.
I will get a pic later.

 

I would think you would want those to come on with the parking lights...

 

Installed the COB LED and it turned out great.