When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
35x12.50 r17 on stock ford rims trimmed some front valance no rubbing the inside but was super close to swaybar and suspension on the front os went with 11/2 spacers all around. 4inch lift Before 1 1/2 spacers
Last edited by Munster; 06-01-2017 at 08:50 PM.
Reason: Ref photo
315/70r17 on 17x8 4.5" bs with bumper trim and a little fender flare trim in the rear. No tbar crank or other suspension work. Only rubbing at full lock. Plus, these duratracs are damn silent until 70+ just a pain to balance
315/70r17 on 17x8 4.5" bs with bumper trim and a little fender flare trim in the rear. No tbar crank or other suspension work. Only rubbing at full lock. Plus, these duratracs are damn silent until 70+ just a pain to balance
Thanks!.. I Yeah I totally agree...With th 3" BL I need to fab the bull bar brackets to raise up the additional height. Probably complete that this Fall/Winter.
Also, next project is new exhaust from manifolds all the way back. Stock exhaust pipe sitting too low and needs replacing anyways.
05-12-2017, 12:40 AM
