2001 supercrew. having problems (4x4 and electrical)
hi, i recently bought a 2001 f150 supercrew. 4x4 5.4L engine. Its got a 5 inch lift and 35s.
when i bought it the 4x4 worked (tested it myself). cruise control fuse was blown. when it snowed hard here i put it in 4 low to get up a hill and then it got stuck in 4 low. we had to manually put it back into 2wd. now it wont go into 4 hi or 4 low (no clicking noises even). any ideas?
also the electrical problem. the cruise control doesn't work after replacing the fuse. neither does the overhead console? all the fuses look good.
please help!
ALSO: after the 4x4 stopped working... everytime i start the truck it clicks 4 or 5 times in the dash sounds like behind the speedo? (loud clicks)
when i bought it the 4x4 worked (tested it myself). cruise control fuse was blown. when it snowed hard here i put it in 4 low to get up a hill and then it got stuck in 4 low. we had to manually put it back into 2wd. now it wont go into 4 hi or 4 low (no clicking noises even). any ideas?
also the electrical problem. the cruise control doesn't work after replacing the fuse. neither does the overhead console? all the fuses look good.
please help!

ALSO: after the 4x4 stopped working... everytime i start the truck it clicks 4 or 5 times in the dash sounds like behind the speedo? (loud clicks)
Last edited by supercrew2001; Feb 29, 2012 at 06:24 PM.
If the 4wd wasn't used much the motors are known for sticking give it a wack with a hammer while switching it usually losen it up the cruise there is a recall for the switch on the master cylinder it leaks then cruse won't work replace the switch and there is a jumper harness update should take are of that issue
Trending Topics
If the 4wd wasn't used much the motors are known for sticking give it a wack with a hammer while switching it usually losen it up the cruise there is a recall for the switch on the master cylinder it leaks then cruse won't work replace the switch and there is a jumper harness update should take are of that issue
Lol I wouldn't say rip it down...but it has plastic clips holding it up,it does have 1 screw holding it toward the front of it,thengently grap the front of it between the head liner tear the Mother out!! nah just kidding.. if you pull down on it should come fairly easy
.. good luck


