i have and 06 super cab 4x4 xlt my problem it the ing power windows passenger side wont work heres what it does. i took the door apart and pulled the motoer out powered up the truck passenger side switch makes it rool up but not down drivers side wont make it move at all, so i cliped a new motor in and the same thing happened i have tried new drivers side master control and a used passenger side switch somebody please help me

 

Do the rear windows work? Did you put power to the yellow/light green wire when you did the test?

 

the rear windows work and i dont know how to test really i used mt meter and there is power constint at the switch and when i tock the motor out the regulater it goes up but wont go down at the passenger side drivers side does nothing i just spent 70 bucks on the new controler and it did nothing im getting really frustrated about it please any help or links would be great

 

I should have asked if it's only the passengers window that doesn't work. If so, and there's power at the yellow/light green wire, the other 2 should be grounded with the swith in neutral. If you hold the switch to up or down, it's supposed to take the ground away from one and add power from the y/lg wire. If one of those wires are broken in the door jam, the window won't work and there won't be a ground on those wires with the switch in neutral.

 

Have you tried cleaning the switches yet?

 

so your saying its most likely a broken wire? and i can check that by holding the switch in either the up or down possition and trying to run my back windows?

 

yes i replaced both drivers side controler and passenger

 

If you connect power to the y/lg (or if it already has power), pressing the switch should put power to the yellow/red or red/yellow and leave thother one grounded. Use the test light, conect the one side to a power source,y/lg if it has power, and check both ye/rd and rd/ye to see if they are grounded. They should be until you press the switch up or down and then one will turn to power and the other will stay grounded. pressing the switch the opposite way will make those 2 wire do the opposite.

 

Do you have the keypad for the door locks?

 

No I do not have the keypad for the drivers door