torque app
Junior Member
Joined: Mar 2014
Posts: 19
Likes: 1
Same here. Got mine off Amazon, a little bigger and a bit more $$ (still only $20 though) but had the best reviews.
Question for you folks - I use the paid Torque app and select the general for PID set. When I run mode 6 ("Test Results") I fail out on two O2 sensors listed as bank 1 location 3 and bank 2 location 3. Since we don't have 6 O2 sensors, what are these really? Are they actually nothing (what I am assuming)?
Question for you folks - I use the paid Torque app and select the general for PID set. When I run mode 6 ("Test Results") I fail out on two O2 sensors listed as bank 1 location 3 and bank 2 location 3. Since we don't have 6 O2 sensors, what are these really? Are they actually nothing (what I am assuming)?
Senior Member
Joined: Sep 2010
Posts: 116
Likes: 2
I added the Ford pids today, thanks! I didn't know that.
The ford pids do duplicate some of the general tests, but they do some different stuff too, all is working for me. Just today, used the Bluetooth Dongle and Torque Pro to diagnose a hesitation at higher revs, no engine light came up...the thing found a misfire on 6 almost immediately...changed the cop with an old one, misfires go away, all is good.
For less than 30 bucks for dongle and program, it is a killer deal...
The ford pids do duplicate some of the general tests, but they do some different stuff too, all is working for me. Just today, used the Bluetooth Dongle and Torque Pro to diagnose a hesitation at higher revs, no engine light came up...the thing found a misfire on 6 almost immediately...changed the cop with an old one, misfires go away, all is good.
For less than 30 bucks for dongle and program, it is a killer deal...
Resident Worm Drowner
Joined: Jan 2014
Posts: 6,778
Likes: 90
From: West Virginia
I've gotten total number of misfires on my log, but can't seem to get individual cylinder misfires. I'm not sure the cpu supports specific cylinders.
Senior Member
Joined: Aug 2013
Posts: 348
Likes: 15
From: Knoxville, TN
Ok, when you go to "test results" you can clearly see individual cylinder misfires, but I am having the same problem in the real time information windows, having lines in the individual boxes, but total misfires work there too...
Junior Member
Joined: Mar 2014
Posts: 19
Likes: 1
Same. I think this is normal for our truck. Can only get individual misfire in mode 6/test results.
Senior Member
Joined: Sep 2010
Posts: 116
Likes: 2
