Hey guys, I am looking to run a 3 inch leveling kit with 35X12.50r20 Toyo Open Country tire with a 20X10 Fuel Octane wheel. I already know that it is going to rub. But can someone tell me if it will work with trimming and to make sure that it wont rub any major parts?

 

2/4wd?

 

Truck is 4x4!

 

You should be good with a 4x4 with 3inch lvl for sure

 

almost 100% that is gonna be to much becuz the offset is gonna be to big and thats a wide tire as well. will it fit yes. able to turn doubt it.

 

Could I do it with a 20x9 wheel with a -12mm offset??

 

yes im pretty positive others run that setup. that would be a lot more safe. would still need to trim, but im sure you'll be able to fix it.

 

what all parts would need the trimming. Really want to rn aftermarket wheels and 35's with the tires sticking out about 1.5" to 2" out of the sides? Can i accomplish this?

 

more than likly the valance. and the rear innerfender

 

So I wouldnt have to make any major mods to any major parts that will make the truck look different.