Step 1: Order a muffler on summit racing with the parts number (SUM-630142 Single Chamber Muffler) and Get a compressed and a grinder ready to use

Step 2: Start cutting the stock muffler off with the grinder and grind it off as close as you can to the muffler.

Step 3: Once grinded off take yourself up the a local parts store and get yourself two 2.5 1foot pipes and four clamps.

Step 4: you will have to put the pipes all in and it will be 5-8 inches longer than you can have it so therefor cut the pipe you bough on the ends where it goes inside the muffler and the stock exhaust. And draw a line and cute the pipe so she will fit in.

Step 5: put it all together put the clamps on and tighten the front clamps down so that all you have to do is adjust the tailpipe and tighten the last clamp in place.

Now I'm not good on saying directions but if there's anything I've missed I'll post when I do remember but I can also only post one picture per post I do or my phone freezes so I'll post some pictures too!

 

Size differences so that's why you need the extra pipes!

 

I got to get a more wide angle of the side connected to the stock exhaust tomorrow because it's raining and dark out now

 

Sound clip!

https://clyp.it/n2ajkf3u

 

thanks bud

 

No problem!

 

When I saw my stock muffler on the shop floor I was like damn. Can't believe how big it is compared to aftermarket options.

 

Ohio weather already got to it and it's only been on for three days!

 

The clamps I mean by the weather in Ohio!

 

damn, from shinny to rusty in only 3 days... Wow