I need a block for the rear of my 2005 crew cab 2 wheel drive that is one inch taller than stock. Anyone have some for sale? Checked out fat bobs and I don't have enough posts to post in the classifieds section yet. Thanks

 

If you have 2wd then you shouldn't have any blocks? I have OEM 1.25" Blocks and U-Bolts from my 2011 FX4 if thats what you're looking for.

 

You can get a pretty good deal on them on Ebay... I would sell you mine but they haven't been removed from the truck yet....

http://www.ebay.com/sch/i.html?_from...All-Categories

 

Do 2 wheel drives have blocks or are the leaf springs on the axle?

 

It should have a factory 1" block or 1.25"....

https://www.f150forum.com/f4/06-f150...nce-4wd-15807/

 

Nope.. My old FX2 did not have blocks..

 

Yeah I guess I will just have to look and see. Some people say no and some say yes. Thanks for the replies guys. I will look this afternoon and see what I need

 

2wd does not have blocks. The leaf springs sit on the frame. I installed OEM blocks that i got on here that were from a 05 4X4 i think. They were 2" blocks. I put them on cause with my 2.5" level on the front it sat nose high and now the back is .5"-1" taller in the back

 

I'm looking at different threads and they are all mixed... I've seen 2WD's with 1" blocks but i'm not a Ford Mechanic or engineer. Those blocks could have very well been added by the first owner.....

 

maybe the 2wd with blocks are the FX2. i dont remember seen a block in my lariat 2wd.