Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

P2106 pd Code

Thread Tools
 
Search this Thread
 
Old Feb 20, 2021 | 01:54 AM
  #11  
Storm Chasing Ford's Avatar
Storm Chaser /Navy Vet
 
Joined: Jan 2012
Posts: 1,092
Likes: 64
From: Moore, OK
Default This happened to me this week!

Originally Posted by taxi
I might be in the rong place for this but I have a for Freestyle 2006 and I get that code P2106... From a cold start It wont **** into second gear and the wrench lights up in the corner.. if I shut the car of and start it again it is fine.. and also recently if I stop fast and go to take off it does the same think where the light comes on and it wont shift.. I have to pull over shut it off and start it again..

I know this is an OLD thread, but this literally JUST happened to me! A video I watched by Ford Tech Makuloco on YouTube suggested changing to the third Gen TPS for a 2106 fix. I’ll update after I swap next weekend when I get paid to see if this worked.
Reply
Old Feb 20, 2021 | 11:09 AM
  #12  
Fordusr's Avatar
Junior Member
 
Joined: Feb 2021
Posts: 1
Likes: 0
Default P2106

I have an 05 f150 fx4 5.4L HELP! This happened to me also this week! I replaced the TPS to the new gen and it didn't fix my problem. From other things I've read online the p1206 code is generic to just going in limp mode. The problem could be in another system. So I'm lost. I would love for it to just be a throttle body issue and be done with it. But any help would be appreciated.
Reply
Old Jul 26, 2021 | 04:19 AM
  #13  
alvinm1's Avatar
Junior Member
 
Joined: Jul 2021
Posts: 5
Likes: 1
From: Connecticut
Default

Originally Posted by Fordusr
I have an 05 f150 fx4 5.4L HELP! This happened to me also this week! I replaced the TPS to the new gen and it didn't fix my problem. From other things I've read online the p1206 code is generic to just going in limp mode. The problem could be in another system. So I'm lost. I would love for it to just be a throttle body issue and be done with it. But any help would be appreciated.

It only occurs once hitting second gear 15 to 25 mph that’s when light cel and wrench light comes on then runs rough like it’s starving for fuel!!!! Other than that it runs great the rest of the time No ABS light comes on

I changed throttle body Fuel filter Reset KEM unplugged battery touched terminals together Still getting code p2106 nightmare . Today I will replace all speed and abs sensors Also replace plugs wires and cap/rotor Do a full tune up May also change fuel sending unit above spare tire Take it to emissions shop . I live in CT Help please !!!!! Anyone have had same issue with Ford F-150 4.6 2004 11th Gen

No rust for North Eastern truck ! 😃
Reply
Old Jul 26, 2021 | 04:21 AM
  #14  
alvinm1's Avatar
Junior Member
 
Joined: Jul 2021
Posts: 5
Likes: 1
From: Connecticut
Default

Originally Posted by Storm Chasing Ford
I know this is an OLD thread, but this literally JUST happened to me! A video I watched by Ford Tech Makuloco on YouTube suggested changing to the third Gen TPS for a 2106 fix. I’ll update after I swap next weekend when I get paid to see if this worked.

that did not work . I replaced it and the 2106 code is still there! 2004 f150 4.6 113k on it
Reply




All times are GMT -4. The time now is 08:34 AM.