I installed hid headlights now my headlights won't work at all I checked my high beam and low beam fuses they are ok. My fogs still work. When I put on The high beams my indicator on The dash doesn't even come on. Any help is appreciated

 

where did you get the kit? Should just be plug and go. Check the connection at the headlight harness for power on both low and highbeams and make sure they're all good and you have power there. Then trace the HID harness to make sure it's wired correctly and everything is grounded properly.

 

I got the kit from third gear performance. They did work I had a problem with a ballast so I took them out and now my headlights don't work at all and The auto on feature doesn't work the fogs. I will check tomorrow to see if it's a fuse or relay it's strange everything else works except headlights

 

Does anyone know what fuse or relay works the Auto on/off feature.
when i try to flash my brights i don't even get the indicator on the dash to light up

 

Somethings un-plugged...You stated you installed and then removed the HID kit ??

 

Yea I had a craked ballast so i pulled the hids off so i can use my silverstars until i get the new ballast in. Everything is working except the headlights.
think i found the problem. I believe its in one of the silverstars every time i plug it in i blow fuses

 

My silverstar blue the high/low fuses and burnt the high beam relay I changed them all and will put The hids back in when I get the ballast in

 

Have u check ur balast

 

You may have cables touching that happens to my girls honda as soon i put the light on ot blow it the fuse

 

It was the bulb itself I got it fixed