Emblems
#1
Senior Member
Thread Starter
Emblems
so after many hours and many cuss words i finished spray painting my emblems they came out blah i have some bad spots and the paint didnt want to stick to the chrome just wanted to ask what did you use to stick them back on i was gonna use 3m double sided tape but will that realy hold in all weather. thnx
#2
Moderator (Ret.)
As long as you prepared the surface pefore applying the 3M tape, it will hold just fine. I always wipe down both mating surfaces with an alcohol pad to remove any wax or oil on the surfaces.
I do the same for surfaces before I paint them as well. Did you end up with "fish eye" blotches with your painted emblems?
I do the same for surfaces before I paint them as well. Did you end up with "fish eye" blotches with your painted emblems?
#3
Senior Member
Thread Starter
As long as you prepared the surface pefore applying the 3M tape, it will hold just fine. I always wipe down both mating surfaces with an alcohol pad to remove any wax or oil on the surfaces.
I do the same for surfaces before I paint them as well. Did you end up with "fish eye" blotches with your painted emblems?
I do the same for surfaces before I paint them as well. Did you end up with "fish eye" blotches with your painted emblems?
#4
Moderator (Ret.)
Remove the paint; clean real good with some prep cleaner (can buy it in a spray can next to all the spray paints within a good auto parts store) or use alcohol pads that you can get at Home depot.
Prevents the fish eye's.
Prevents the fish eye's.
#5
BLOWN club
agreed on wiping it down real good, i had a side scoop "peel off" on my mustang cuz they body shop didnt clean the surface enough to hold it on there with wind blowing into it
#6
Senior Member
Thread Starter
well i jut left them the way they were they look great from afar just close up is when u see it oh well... i stuck them on the truck today i rubbed evrything with alcohol and used 3m tape so hope it holds i will get some pics up as soon as i can thnx
Trending Topics
#9
Senior Member
Join Date: Feb 2009
Location: Edmonton Alberta Canada
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
I have to redo mine. The emblem on the grill took a few bugs and then the pressure washer peeled th paint in a few spots. My passanger side emblem has been painte twice already and needs it again. It was prepped the same and used the same paint but seems to like to peel in the samn spot. Pics on the truck?