Here recently my Edge programmer has been acting up. For some reason my display is no longer showing my Average Miles Per Gallon display. The box is there and it says "AMPG" but there is no number under it. I have switched it between settings and still no luck. Anyone else ever have this issue and do you no a way to resolve this problem. Thanks, Pope

 

unplug while driving and then plug it back in. Ive had to do that a few times

 

Unplug from the OBD port while driving? That won't mess anything up?

 

No, it won't hurt anything as long as your not in the middle of programming the PCM, if your drive along though, its okay to unplug it, sometimes mine freezes and I just unplug and replug while driving

 

Mine isn't freezing. I have mine showing 4 different reading on the display. The other 3 are showing the readings but the AMPG isn't showing anything

 

Programmer lesson for the day. The Evo and other programmers flash the PCM with a new file. After programming is complete, the PCM is stuck to that program. The Edge simply acts as a monitor from that point on and doesn't have to be plugged in at all.
Try plugging and unplugging it, and if you haven't updated it in a while set it back to stock and update. If it doesn't work beyond that then it is either the device has an issue or the truck isn't relaying the information for that parameter.

 

Thanks for clearing it up for me. I will give it a shot tomorrow

 

It worked. All is well again. Sorry for questioning you all. Thanks again

 

Does anyone here know if a buy of an edge evo for 200 a good buy?! It's about 2 years old though

 

Sounds good as long as it works right i bought mine new for 350 coulda been cheaper but i chose fast shipping cuz im impatient