cruize controll
05 5.4l 3v s.crew lariat
Joined: Oct 2009
Posts: 3,505
Likes: 672
From: fl
If you are using led brake lights without a special loading
resistor it will kill your cruise.
Third brake light also . Because the cruise stop is triggered by the brake pedal, you can add loading resistors see 4x4 truck led vendor .
Third brake light also . Because the cruise stop is triggered by the brake pedal, you can add loading resistors see 4x4 truck led vendor .
Senior Member
Joined: Nov 2013
Posts: 117
Likes: 8
From: Missouri
Mine stopped working also? I just checked and My third Brake light is working fine and I cannot find anywhere in the owners manual a fuse for the cruise control? Anybody know what number the fuse is or where it would be? 
Senior Member
Joined: Jul 2013
Posts: 1,337
Likes: 282
From: Slate River, ON
Did you check what I noted above? That could answer the questions right away.
Trending Topics
Member
Joined: Aug 2016
Posts: 36
Likes: 4
From: East of Parker Colorado
If the brake warning light on your dash is lit, the cruise won't work.
It could be:
1- Dirty ABS Sensors
2- Low brake fluid
3- For me, it was a fault in my instrument cluster printed circuit.
If you bang on the left side of the dash with your palm, near the cluster and the light goes out, there's your place to start looking. My cluster is at the shop now being repaired.
Good Luck, L.M.
It could be:
1- Dirty ABS Sensors
2- Low brake fluid
3- For me, it was a fault in my instrument cluster printed circuit.
If you bang on the left side of the dash with your palm, near the cluster and the light goes out, there's your place to start looking. My cluster is at the shop now being repaired.
Good Luck, L.M.